Research progress in the mechanical properties and oxidation resistance modification effect of interphase of SiC matrix composites reinforced with continuous fibers

被引：0
作者：
Xu B. [1 ]
Yang H. [1 ]
Luo R. [1 ]
Huang J. [1 ]
Wang L. [2 ]
Chen D. [1 ]
Li W. [1 ]
机构：
[1] School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang
[2] Research Institute for Frontier Science, Beihang University, Beijing
来源：
Hangkong Dongli Xuebao/Journal of Aerospace Power | 2023年 / 38卷 / 04期
关键词：
continuous fibers; interphase; mechanical properties; oxidation resistance; SiC matrix composites;
D O I：
10.13224/j.cnki.jasp.20210605
中图分类号：
学科分类号：
摘要：
The mechanical and oxidation resistance modification effects, the related influencing factors, and the shortcomings of pyrocarbon （PyC） and its derivatives, BN and its derivatives, new style interphases, and compound interphases were reviewed, and several common interphases preparation technologies were also briefly compared. Among them, the PyC interphase had excellent mechanical modification but no oxidation resistance, and adding B element was still difficult to overcome its intrinsic oxidation resistance. The comprehensive performance of BN interphase was preferably good, but brittle at medium temperature and was not moisture-proof. Lots of advantages of composite interphase were presented, but the problems such as mismatch of thermal expansion coefficient and poor chemical compatibility can not be ignored. The new interphase was hard to be considered in terms of properties or preparation methods. The future development direction is to improve the performance database and damage mechanism, to explore more new types of interfacial phases, and to tap the potential of existing interfacial phase preparation processes. © 2023 BUAA Press. All rights reserved.
引用
收藏
页码：921 / 930
页数：9
相关论文
共 96 条
  • [1] TIAN Linghan, ZHANG Qiang, LI Fengzhou, Application of silicon carbide based composite in solid propellant ramjet, Journal of Projectiles, Rockets, Missiles and Guidance, 40, 5, pp. 72-75, (2020)
  • [2] LIU Qiaomu, HUANG Shunzhou, HE Aijie, Application requirements and challenges of CMC-SiC composites on aero-engine, Journal of Materials Engineering, 47, 2, pp. 1-10, (2019)
  • [3] YIN X W, CHENG L F，, ZHANG L T, Et al., Fibre-reinforced multifunctional SiC matrix composite materials, International Materials Reviews, 62, 3, pp. 117-172, (2017)
  • [4] GARSHIN A P, KULIK V I, NILOV A S., Main areas for improving refractory fiber-reinforced ceramic matrix composite corrosion and heat resistance, Refractories and Industrial Ceramics, 58, 6, pp. 673-682, (2018)
  • [5] SPITSBERG I，, STEIBEL J., Thermal and environmental barrier coatings for SiC/SiC CMCs in aircraft engine applications, International Journal of Applied Ceramic Technology, 1, 4, pp. 291-301, (2004)
  • [6] LIU Haitao, CHENG Haifeng, WANG Jun, Et al., Effects of carbon coating removal of sic fiber on mechanical properties and interface characteristics of 2D-SiC<sub>f</sub>/SiC composites, Rare Metal Materials and Engineering, 40, 5, pp. 867-870, (2011)
  • [7] YANG Baolin, RAO Yongsheng, Deposition process of low temperature isotropic pyrolytic carbon, New Carbon Materials, 3, pp. 151-158, (1991)
  • [8] WANG Qingchao, LU Ping, HUANG Zhen, Et al., Experimental study on low temperature pyrolysis of biomass, Proceedings of The Chinese Society for Electrical Engineering, 32, pp. 121-126, (2012)
  • [9] HE Zongbei, ZHANG Ruiqian, FU Daogui, Et al., Tensile mechanical behavior of SiC fiber bundle reinforced composites with different interfaces, Journal of Materials Engineering, 47, 4, pp. 25-31, (2019)
  • [10] KABEL J, YANG Y, Et al., Micro-mechanical evaluation of SiC-SiC composite interphase properties and debond mechanisms, Composites Part B Engineering, 131, pp. 173-183, (2017)
12345678910