Research on Power Flow Calculation Method for Multi-voltage DC Distribution Network Considering Different Connection Modes

被引:0
|
作者
Wang X. [1 ]
Han M. [1 ]
Cao W. [1 ]
Xie W. [1 ]
Yu J. [1 ]
Li R. [2 ]
Qin J. [3 ]
机构
[1] State Key Laboratory of Alternate Electrical Power System With Renewable Energy Sources, North China Electric Power University, Changping District, Beijing
[2] China Electric Power Research Institute, Haidian District, Beijing
[3] State Grid Jiangsu Province Electric Power Co., Ltd., Research Institute, Nanjing
来源
基金
国家重点研发计划;
关键词
AC/DC converter; DC/DC converter; Power flow solution; Wiring mode;
D O I
10.13335/j.1000-3673.pst.2020.1369
中图分类号
学科分类号
摘要
The power flow analysis of the DC distribution network is the basis of the design, operation and maintenance of the DC distribution system. Traditional DC power flow calculation methods cannot meet the power flow calculation requirements of multi-voltage DC power grids with more flexible control methods, more diverse operating modes, and richer load types. To this end, this paper proposes a power flow algorithm for multi-voltage DC distribution networks under different wiring modes. First, consider the multiple control methods of AC/DC converters and DC/DC converters, and establish a unified power flow control equation. Secondly, it studies the power flow calculation models of AC/DC converters and DC/DC converters in different connection modes, and focuses on the analysis of the power flow equation construction methods of different types of DC loads in true bipolar and pseudo bipolar networks. Furthermore, the steps and methods for solving the unbalanced network power flow equation are given. Finally, the demonstration project of the VSC multi-voltage DC distribution network at both ends of Suzhou is taken as an example to verify the effectiveness of the multi-voltage DC power flow algorithm proposed in this paper under different control methods. © 2021, Power System Technology Press. All right reserved.
引用
收藏
页码:2359 / 2368
页数:9
相关论文
共 22 条
  • [1] HAN Minxiao, XIE Wenqiang, CAO Wenyuan, Et al., Application scenarios and system design of medium-voltage DC distribution network, Automation of Electric Power Systems, 43, 23, pp. 2-11, (2019)
  • [2] JIANG Daozhuo, ZHENG Huan, Research status and developing prospect of DC distribution network, Automation of Electric Power Systems, 36, 8, pp. 98-104, (2012)
  • [3] CAO Wenyuan, HAN Minxiao, XIE Wenqiang, Et al., Research on the power supply capacity of medium voltage DC distribution network in urban distribution network transformation, Modern Electric Power, 35, 2, pp. 56-63, (2018)
  • [4] MA Zhao, JIAO Zaibin, LI Rui, Network structures and key technologies of DC distribution systems, Power System Technology, 41, 10, pp. 3348-3357, (2017)
  • [5] HAN Minxiao, WANG Haojie, DC micro-grid the important mode in the field of power supply and consumption, Journal of Electrical Engineering, 10, 5, pp. 1-9, (2015)
  • [6] ZENG Rong, ZHAO Yuming, ZHAO Biao, Et al., A prospective look on research and application of DC power distribution technology, Proceedings of the CSEE, 38, 23, pp. 6791-6801, (2018)
  • [7] SONG Qiang, ZHAO Biao, LIU Wenhua, Et al., An overview of research on smart DC distribution power network, Proceedings of the CSEE, 33, 25, pp. 9-19, (2013)
  • [8] SUN Liming, Power flow calculation and reactive power optimization of AC/DC hybrid system with VSC-HVDC, (2019)
  • [9] WANG Bo, LU Junhai, GUO Xiaojiang, Et al., Load flow analysis for power system with multi-VSC based converter, Power System Technology, 40, 8, pp. 2344-2349, (2016)
  • [10] CHEN Yu, HAO Quanrui, ZHANG Jing, Dynamic flow algorithm for hybrid AC/DC networks with VSC-HVDC, Power System Technology, 42, 9, pp. 2892-2899, (2018)