A study of directional explosion venting characteristics of anti-explosion vessel with a shear pin

被引：0

作者：

Xie, Jiang ^{[1
]}

Pan, Hanyuan ^{[2
]}

Jiang, Yilun ^{[2
]}

Yang, Xiang ^{[3
]}

Li, Xuan ^{[2
]}

Guo, Delong ^{[4
]}

Feng, Zhenyu ^{[1
]}

机构：

[1] Science and Technology Innovation Research Institute, Civil Aviation University of China, Tianjin

[2] College of Safety Science and Engineering, Civil Aviation University of China, Tianjin

[3] COMAC Shanghai Aircraft Design and Research Institute, Shanghai

[4] School of Mechatronical Engineering, Beijing Institute of Technology, Beijing

来源：

Baozha Yu Chongji/Explosion and Shock Waves | 2024年 / 44卷 / 07期

关键词：

anti-explosion vessel; blast wave; explosion venting; failure behavior; shear pin;

D O I：

10.11883/bzycj-2023-0321

中图分类号：

学科分类号：

摘要：

Once an explosion accident occurs on a civil aviation aircraft, it will cause fatal damage to the aircraft structure. In order to provide a scientific basis for the structural design and engineering application of airborne anti-explosion vessel, the directional explosion venting characteristics of anti-explosion vessel with a shear pin are studied. The structure system is mainly composed of a cylindrical vessel, a venting cover, a shear pin and an aluminum alloy panel. Firstly, the numerical model of the anti-explosion vessel under implosion is established with LS-DYNA. The critical diameter of shear pin was obtained in explosion tests and the effectiveness of the model is verified. Then, the propagation of shock wave and distribution of blast loading in the anti-explosion vessel are elucidated by analyzing the distribution of explosion flow field and changes in shock wave pressure. Meanwhile, the motion law of venting cover during the process of explosion venting is studied by varying the TNT charge mass and shear pin diameter. Finally, a functional relationship between the charge weight and shear pin diameter is established with different venting cover masses, to investigate the critical fracture issue of the shear pin. The results show that the critical diameter of the shear pin is found to be 22 mm through 100 g TNT internal explosion tests. Following the TNT explosion, the shock wave propagates reciprocally in the vessel. At approximately 3.8 ms, the venting cover is ejected from the vessel, while the residual pressure at the bottom of the vessel is approximately 0.5 MPa at 5 ms. During the explosion venting process, the peak overpressure at the bottom of the vessel is about 144 MPa, and the peak overpressure at the corner formed by the intersection of the vessel wall and the venting cover is about 149 MPa. Moreover, the vessel wall experiences strain growth at the corner, where it becomes a new critical point of failure. The deformation and fracture process of the shear pin can influence the motion characteristics of the venting cover, resulting in a decrease in the velocity curve. Therefore, the duration of the decreasing segment in the velocity curve is directly proportional to the diameter of the shear pin, with larger diameters leading to longer durations. The inertia of the venting cover and the stiffness of the shear pin are the main reasons for the fluctuation of the velocity of the venting cover during the explosion venting process. The TNT mass and the critical diameter of shear pin displays a proportional relationship. However, the change of the venting cover mass does not affect the linear relationship between the critical diameter and the TNT mass. © 2024 Explosion and Shock Waves. All rights reserved.

引用

共 40 条

[1] Security related considerations in the design and operation of transport category airplanes: Amendment No. 25-127, (2008)
[2] Least risk bomb location: FAA. AC No: 25.795-6, (2008)
[3] XU W Z, WU W G., Effects of size of venting holes on the characteristics of quasi-static overpressure in confined space [J], Chinese Journal of High Pressure Physics, 31, 5, pp. 619-628, (2017)
[4] LIU M J, LI Z, XIE W, Et al., A novel hazard warehouse and its safety separation distance, Explosion and Shock Waves, 43, 4, (2023)
[5] LANGDON G S, KRIEK S, NURICK G N., Influence of venting on the response of scaled aircraft luggage containers subjected to internal blast loading, International Journal of Impact Engineering, 141, (2020)
[6] WANG J G, HU C, LUO F Y, Et al., Experimental study on the effects of venting area on the structural response of vessel walls to methane-air mixture deflagration, Explosion and Shock Waves, 42, 4, (2022)
[7] FENG Z Y, FU B Y, XIE J, Et al., Dynamic response of fuselage panel under explosive impact load, Acta Aeronautica et Astronautica Sinica, 43, 6, (2022)
[8] ZHANG Y L, CHEN H, HAN L, Et al., Effect of venting area on quasi-static pressure of internal explosion for thermobaric explosive [J], Chinese Journal of Explosives & Propellants, 43, 5, pp. 521-525, (2020)
[9] WANG W, LIU R C, WU B, Et al., Engineering arithmetic for internal blast waves parameters in venting area of building structures [J], Journal of Vibration and Shock, 34, 9, pp. 48-54, (2015)
[10] YANKELEVSKY D Z, KOCHETKOV A V, FELDGUN V R, Et al., A simplified model for explosion venting due to the separation of a heavy protective cover [J], International Journal of Protective Structures, 3, 1, pp. 81-103, (2012)

← 1 2 3 4 →