PROPOSAL OF DEFORMATION HISTORY INTEGRAL TYPE HYSTERESIS MODEL CONSIDERING PERFORMANCE CHANGE OF HIGH-DAMPING RUBBER BEARINGS AND VERIFICATION USING SUBSTRUCTURE REAL-TIME ONLINE TESTING SYSTEM FOR SEISMICALLY ISOLATED STRUCTURE

被引：0

作者：

Mori T. ^{[1
]}

Takeuchi S. ^{[1
]}

Maruyama K. ^{[1
]}

Kato K. ^{[1
]}

Murota N. ^{[1
]}

Suzuki S. ^{[1
]}

机构：

[1] Bridgestone Corporation, Seismic Isolation and Vibration Control Products Development Dept

来源：

Journal of Structural and Construction Engineering | 2022年 / 87卷 / 799期

关键词：

High-damping rubber bearing; Hysteresis model; Performance change; Seismic isolation; Substructure real-time online test; Time history response analysis;

D O I：

10.3130/aijs.87.890

中图分类号：

学科分类号：

摘要：

Improved deformation history integral type hysteresis model (DHI model) is proposed. Original DHI model was elasto-plastic model and developed mainly for high-damping rubber bearings. While the model can represent the complex behavior of high-damping rubber bearings, there is an issue that the model cannot consider the performance change. Thus, the model was improved by defining the material parameters as a function of performance change ratio. In order to confirm the accuracy of the proposed model, time history analysis was carried out and compared the result of analysis with that of substructure real-time online testing system. © 2022 Architectural Institute of Japan. All rights reserved.

引用

页码：890 / 901

页数：11

共 26 条

[1]

Fujita T., Suzuki S., Fujita S., High Damping Rubber Bearings for Seismic Isolation of Buildings, Transactions of the Japan society of mechanical engineers. C, 56, 523, pp. 658-666, (1990)

[2]

Kikuchi M., Aiken I. D., AN ANALYTICAL HYSTERESIS MODEL FOR ELASTOMERIC SEISMIC ISOLATION BEARINGS, Earthquake Engineering and Structurl Dynamics, 26, pp. 215-231, (1997)

[3]

Yamamoto M., Minewaki S., Yoneda H., Higashino M., Wada A., FULL-SCALE TESTS AND ANALYTICAL MODEL OF HIGHDAMPING RUBBER BEARINGS USING TWO HORIZONTAL DIRECTIONAL LOADING, Journal of Structural and Construction Engineering (Transactions of AIJ), 74, 638, pp. 639-645, (2009)

[4]

Kato H., Mori T., Murota N., Ishii K., Kikuchi M., A HYSTERESIS MODEL OF HIGH-DAMPING RUBBER BEARINGS USING AN INTEGRAL TYPE DEFORMATION HISTORY CONSTITUTIVE LAW, Journal of Structural and Construction Engineering (Transactions of AIJ), 76, 667, pp. 1721-1728, (2011)

[5]

Mori T., Kato H., Takeuchi S., Kikuchi T., Murota N., EXPERIMENTAL STUDY ON INFLUENCE OF DYNAMIC COMPONENT OF WIND LOADING ON RESPONSE CHARACTERISTICS OF HIGH DAMPING RUBBER BEARINGS AND MODELING FOR WIND RESPONCE ANALYSIS, Journal of Structural and Construction Engineering (Transactions of AIJ), 77, 676, pp. 823-832, (2012)

[6]

Mori T., Kato H., Murota N., FEM ANALYSIS OF HIGH DAMPING LAMINATED RUBBER BEARINGS USING AN ELASTIC-PLASTIC CONSTITUTIVE LAW OF THE DEFORMATION HISTORY INTEGRAL TYPE, Journal of Structural and Construction Engineering (Transactions of AIJ), 75, 658, pp. 2171-2178, (2010)

[7]

Kato H., Mori T., Murota N., Suzuki S., Minewaki S., Yamamoto M., Yoneda H., Higashino M., AN EXPERIMENTAL AND ANALYTICAL STUDY ON ULTIMATE PROPERTIES OF SEISMIC RUBBER BEARINGS UNDER HORIZONTAL BIAXIAL LOADING, AIJ Journal of Technology and Design, 16, 32, pp. 167-172, (2010)

[8]

Maruyama K., Mori T., Kato H., Kato K., Analysis model of seismic isolation rubber considering variation of characteristics, Summaries of Technical Papers of Annual Meeting, Architectural Institute of Japan, B-2, Structure II, pp. 897-898, (2018)

[9]

Study on repeated loading characteristics of seismic isolation devices and its influence to seismically isolated structures, Building Research Report, 170, (2016)

[10]

Yukawa M., Inaba M., Takeuchi Y., Furuhashi T., Nakamura T., Naito., N: BEHAVIOR OF LEAD RUBBER BEARING BY HEAT ACCOMPANY MULTI-CYCLIC LOADING, Journal of Structural and Construction Engineering (Transactions of AIJ), 83, 745, pp. 385-395, (2018)

← 1 2 3 →