Study on the influence of cement slurry viscosity on acoustic emission response and deformation characteristics of slurry-coal cemented body

被引：1

作者：

Liu, Jian ^{[1
]}

Zhu, Jialiang ^{[1
]}

Ji, Xiaoli ^{[2
]}

Song, Xiaolong ^{[3
]}

Xue, Yonglin ^{[1
]}

机构：

[1] Anhui Univ Sci & Technol, Sch Safety Sci & Engn, Huainan, Peoples R China

[2] Anhui Univ Sci & Technol, Sch Chem Engn & Blasting, Huainan, Peoples R China

[3] Anhui Univ Sci & Technol, State Key Lab Min Response & Disaster Prevent & Co, Huainan, Peoples R China

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2024年 / 450卷

关键词：

Slurry viscosity; Slurry-coal cemented body; Acoustic emission; Cracks; MECHANISM;

D O I：

10.1016/j.conbuildmat.2024.138735

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

In the process of grouting sealing, the cementation failure of slurry and coal interface exists in the gas extraction borehole, which leads to unstable and gas leakage in the sealing section and affects the efficient gas extraction in the borehole. In order to study the influence of slurry viscosity on the failure characteristics of slurry-coal cemented body, this paper explores the law of influence of slurry viscosity on the acoustic emission response characteristics and deformation characteristics of slurry-coal cemented body under uniaxial compression through laboratory tests, data analysis and quantitative research of image processing. The results show that: (1) Changing the slurry viscosity can achieve the strength control of the cemented body, which can be increased by up to 42.65 %. (2) In the process of uniaxial compression, the cementation structure of slurry-coal cemented body breaks down successively, and its proportion and strength lead to the distribution difference of AE signals and the fluctuation of b-value. Combined with the phase response characteristics of the two, the change of failure mode can be analyzed to provide a reliable evaluation of crack propagation in the cemented body. (3) The b-value of the sample of slurry-coal cemented body with high-viscosity slurry does not fluctuate significantly, and is relatively stable at a low level near 1.0. The results are helpful to promote the research and development of sealing materials and sealing technology.

引用

页数：10