HEAT TRANSFER CHARACTERISTICS ANALYSIS OF VERTICAL BURIED HEAT EXCHANGERS

被引：0

作者：

Ma P. ^{[1
]}

Mo L. ^{[2
]}

Zhang J. ^{[2
]}

Hu T. ^{[1
]}

Zhao M. ^{[1
]}

机构：

[1] School of Mechatronic Engineering, Southwest Petroleum University, Chengdu

[2] School of Mechatronic Engineering, and Geothermal Energy Research Center, Southwest Petroleum University, Chengdu

来源：

Journal of GeoEngineering | 2022年 / 17卷 / 03期

关键词：

Ground source heat pump; Heat exchange efficiency; Heat exchanger; Well group;

D O I：

10.6310/jog.202209_17(3).1

中图分类号：

学科分类号：

摘要：

Heat transfer characteristics of buried closed-loop heat exchange tubes directly affect the efficiency of ground source heat pump systems. To improve the heat transfer efficiency of a geothermal system, a simulation model of a shallow buried closed-loop heat exchanger in Chengdu is established. The heat transfer characteristics of U-tube heat exchangers are investigated. The influence of tube diameter, flow velocity, tube configuration and well group distribution distance on the system heat transfer was studied. The results show that the highest heat transfer efficiency of the buried tube is at the bottom of the inlet section. The optimal heat transfer fluid velocity in the inlet is around 0.6 m/s, and the continuous operation time should not exceed 10 h. The efficiency of the W-shaped structure is increased by 4.8% than U-shaped, and the uniform distribution distance arrangement is the best. The overall heat transfer performance of the borehole heat exchanger is the highest when the distribution distance is 0.5-0.75 m. Those results can provide a basis for designing buried heat exchangers and optimizing geothermal systems. © 2022,Journal of GeoEngineering. All Rights Reserved.

引用

页码：123 / 131

页数：8

共 50 条

[21] Heat transfer and friction characteristics of fin-and-tube heat exchangers
Yan, WM
Sheen, PJ
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2000, 43 (09) : 1651 - 1659
[22] Design and Heat Transfer Characteristics of the Buried Pipe Group With Vertical Inlet and Flat Outlet
Zhang, Jie
Ma, Peifa
Mo, Li
Zhao, Meng
Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2022, 43 (10): : 2734 - 2741
[23] Heat transfer analysis of short helical borehole heat exchangers
Zarrella, A. (angelo.zarrella@unipd.it), 2013, Elsevier Ltd (102)
[24] Heat transfer analysis of short helical borehole heat exchangers
Zarrella, A. (angelo.zarrella@unipd.it), 1600, Elsevier Ltd (102):
[25] Heat transfer analysis of short helical borehole heat exchangers
Zarrella, Angelo
De Carli, Michele
APPLIED ENERGY, 2013, 102 : 1477 - 1491
[26] Heat Transfer in Heat Exchangers Computed by Regression Analysis.
Olehla, Josef
Wissenschaftliche Zeitschrift - Technische Hochschule Karl-Marx-Stadt, 1980, 22 (02): : 119 - 132
[27] Numerical analysis of heat transfer of double pipe heat exchangers
Zhang, Jun-Xia
Wang, Li
Feng, Jun-Xiao
Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology, 2012, 38 (02): : 288 - 293
[28] Heat transfer analysis of ground heat exchangers with inclined boreholes
Cui, P
Yang, HX
Fang, ZH
APPLIED THERMAL ENGINEERING, 2006, 26 (11-12) : 1169 - 1175
[29] (PLATE HEAT EXCHANGERS) - HEAT TRANSFER
MCKILLOP, AA
DUNKLEY, WL
INDUSTRIAL AND ENGINEERING CHEMISTRY, 1960, 52 (09): : 740 - 744
[30] Computational heat transfer in heat exchangers
Sunden, Bengt
HEAT TRANSFER ENGINEERING, 2007, 28 (11) : 895 - 897

← 1 2 3 4 5 →