Non-linear deflection performance of welded stainless steel I-section beams

被引：0

作者：

Yuan H.-X. ^{[1
]}

Chen X.-W. ^{[1
]}

Cai J.-S. ^{[2
]}

Du X.-X. ^{[1
]}

机构：

[1] Hubei Provincial Key Laboratory of Safety for Geotechnical and Structural Engineering, School of Civil Engineering, Wuhan University, Wuhan

[2] CITIC General Institute of Architectural Design and Research Co., Ltd, Wuhan

来源：

Gongcheng Lixue/Engineering Mechanics | 2021年 / 38卷 / 01期

关键词：

Calculation method; Experimental study; FE analysis; Nonlinear deflection; Stainless steel beam;

D O I：

10.6052/j.issn.1000-4750.2020.01.0022

中图分类号：

学科分类号：

摘要：

Five welded stainless steel I-section beams were subjected to three-point bending to explore the non-linear deflection behavior of stainless steel beams. Finite element (FE) models were developed by considering the material nonlinearity, initial geometric imperfections and welding residual stresses. The models were validated against the experimental results. Based on the validated numerical models, both the calculation method in the Chinese technical specification for stainless steel structures (CECS 410) and the proposal of Real-Mirambell were evaluated. A simplified calculation formula for the yielding moment M0.2 of stainless steel cross-sections was proposed based on the plane section assumption and the stress-strain relationship of stainless steels. The decrease in the initial flexural stiffness resulted from the welding residual stresses was considered by introducing reduction coefficients for different stainless steel alloys. Revised formulas for the CECS 410 method and the Real-Mirambell proposal were presented, which provided accurate and reasonable deflection predictions for welded stainless steel I-section beams. Copyright ©2021 Engineering Mechanics. All rights reserved.

引用

页码：78 / 88

页数：10

共 18 条

[1]

Shang Fan, Yang Lu, Zhao Menghan, Et al., FEA of the overall stability for I-section stainless steel member under axial compression, Engineering Mechanics, 33, 3, pp. 112-119, (2016)

[2]

Fan Shenggang, Zheng Jiacheng, Sun Wenjun, Et al., Experimental investigation on mechanical properties of S30408 austenitic stainless steel at elevated temperatures, Engineering Mechanics, 34, 4, pp. 167-176, (2017)

[3]

Yang Lu, Wei Xuan, Zhang Youzhen, Et al., Research on the tensile stress-strain relation of stainless steel base material and its weld metal material, Engineering Mechanics, 35, 5, pp. 125-130, (2018)

[4]

Yuan Huanxin, Hu Song, Du Xinxi, Et al., Tests on load-carrying behavior of stainless steel bolted t-stub connections, Engineering Mechanics, 36, 2, pp. 215-223, (2019)

[5]

Rasmussen K J R, Hancock G J., Design of cold-formed stainless steel tubular members. II: Beams, Journal of Structural Engineering, 119, 8, pp. 2368-2386, (1993)

[6]

Mirambell E, Real E., On the calculation of deflections in structural stainless steel beams: an experimental and numerical investigation, Journal of Constructional Steel Research, 54, 1, pp. 109-133, (2000)

[7]

Real E, Mirambell E., Flexural behaviour of stainless steel beams, Engineering Structures, 27, 10, pp. 1465-1475, (2005)

[8]

Wang Yuanqing, Chang Ting, Shi Yongjiu, Et al., Experimental study on the deformation behavior of symmetric stainless steel I-beams, Industrial Construction, 42, 5, pp. 29-32, (2012)

[9]

Wang Yuanqing, Gao Bo, Dai Guoxin, Et al., Non-linear deformation analysis of doubly symmetric stainless steel flexural members, Journal of Wuhan University of Technology (Transportation Science & Engineering), 36, 4, pp. 662-666, (2012)

[10]

Xin Lianchun, Shen Xiaoming, Shu Ganping, Et al., Experiment investigations of stainless steel beams, Industrial Construction, 42, 5, pp. 33-40, (2012)

← 1 2 →