Calculation Model of Winding Loss of Litz-Wire Based on Equivalent Complex Permeability

被引：0
|
作者：
Zhao Z. [1 ,2 ]
Wang L. [1 ,2 ]
Chen T. [1 ,2 ]
Zhao A. [1 ,2 ]
Lu Z. [1 ,2 ]
机构：
[1] State Key Laboratory of Reliability and Intelligence of Electrical Equipment Hebei University of Technology, Tianjin
[2] Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability of Hebei Province Hebei University of Technology, Tianjin
来源：
Diangong Jishu Xuebao/Transactions of China Electrotechnical Society | 2024年 / 39卷 / 04期
关键词：
equivalent complex permeability; Litz-wire; proximity effect; skin effect; winding loss;
D O I：
10.19595/j.cnki.1000-6753.tces.222170
中图分类号：
学科分类号：
摘要：
Asan important component of the overall loss of high-frequency transformers, winding loss is a key parameter affecting the volume, efficiency, and temperature rise of magnetic components. Litz-wire is widely used in high-frequency transformer winding because of its ability to achieve conductor in-turn transposition and reduce losses due to the skin effect and proximity effect. The homogenization technique, using a region with the equivalent complex material properties instead of the winding region, can realize the characterization of the eddy current effect by the two-dimensional magnetic field and reduce the computational cost of refinement modeling. However, the material properties of the equivalent region are obtained using numerical methods, making the calculation complex. Therefore, this paper establishes a loss calculation model of Leeds wire winding based on equivalent complex permeability to calculate winding losses accurately and efficiently. Firstly, the winding loss calculation model is established based on the orthogonality of the skin and proximity effects. The equivalent complex permeability of the winding is calculated using the factory data of the Litz-wire. Then, the overall modeling of Litz-wire winding is carried out in the simulation software, and the external magnetic field value of the winding is extracted for the proximity effect loss calculation. Finally, the skin effect loss is calculated using the analytical formula. The actual winding model of AC resistance in the wide frequency (20 Hz~1 MHz) range shows that AC resistance in the low-frequency band (20 Hz~100 kHz)is approximately equal to DC resistance. At this time, the calculation error can be almost neglected, and the calculation accuracy mainly depends on the calculated value of the DC resistance. The skin effect in the medium-frequency band (100 kHz~500 kHz) becomes gradually obvious, and AC resistance rises rapidly. The highest error is around 300 kHz, and the maximum is 10.07%. In the high-frequency band (500 kHz~1 MHz), the proximity effect between the winding makes the AC resistance rise rapidly. The maximum error in the high-frequency band is 15.22%, and the error in the rest of the frequency is about 10%. The following conclusions can be obtained: (1) By describing the equivalent complex permeability of the circular Litz-wire winding analytically, the preprocessing of the basic unit is avoided, and the calculation process is simplified. (2) The homogenized finite element method is used for overall modeling. The eddy current is analyzed in the three-dimensional structure of the Litz-wire winding based on the two-dimensional static magnetic field distribution and combined with the complex permeability model. The calculation accuracy and speed are improved. (3) Considering the influence of the winding section shape on the loss, the skin effect and proximity effect are characterized, increasing the applicability of the model at high frequency and realizing the accurate loss prediction at wide frequency. © 2024 China Machine Press. All rights reserved.
引用
收藏
页码：947 / 955
页数：8
相关论文
共 24 条
  • [11] Stoll R L., The analysis of eddy current, (1974)
  • [12] Moreau O, Popiel L, Pages J L., Proximity losses computation with a 2D complex permeability model-ling, IEEE Transactions on Magnetics, 34, 5, pp. 3616-3619, (1998)
  • [13] Podoltsev A D, Kucheryavaya I N, Lebedev B B., Analysis of effective resistance and eddy-current losses in multiturn winding of high-frequency magnetic components, IEEE Transactions on Magnetics, 39, 1, pp. 539-548, (2003)
  • [14] Gyselinck J, Dular P., Frequency-domain homogenization of bundles of wires in 2-D magneto-dynamic FE calculations, IEEE Transactions on Magnetics, 41, 5, pp. 1416-1419, (2005)
  • [15] Kharezy M, Eslamian M, Thiringer T., Estimation of the winding losses of medium frequency transformers with Litz wire using an equivalent permeability and conductivity method, 2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe), pp. 1-7, (2020)
  • [16] Nan Xi, Sullivan C R., An equivalent complex permeability model for Litz-wire windings, IEEE Transactions on Industry Applications, 45, 2, pp. 854-860, (2009)
  • [17] Zhang Ke, Chen Wu, Cao Xiaopeng, Et al., Accurate calculation and sensitivity analysis of leakage inductance of high-frequency transformer with Litz wire winding, IEEE Transactions on Power Electronics, 35, 4, pp. 3951-3962, (2020)
  • [18] Chen Bin, Li Lin, Zhao Zhibin, Et al., Design method of inductor-integrated high-power high-frequency transformers, Proceedings of the CSEE, 38, 5, pp. 1356-1368, (2018)
  • [19] Sullivan C R, Zhang R Y., Analytical model for effects of twisting on Litz-wire losses, 2014 IEEE 15th Workshop on Control and Modeling for Power Electronics (COMPEL), pp. 1-10, (2014)
  • [20] Igarashi H., Semi-analytical approach for finite-element analysis of multi-turn coil considering skin and proximity effects, IEEE Transactions on Magnetics, 53, 1, pp. 1-7, (2017)
123