Research progress in friction reduction and wear resistance of graphene in stainless steel applications

被引：0

作者：

Guo W.-M. ^{[1
]}

Bai Q.-S. ^{[1
]}

Dou Y.-H. ^{[1
]}

Guo Y.-B. ^{[1
]}

Du Y.-L. ^{[1
]}

机构：

[1] School of Mechatronics Engineering, Harbin Institute of Technology, Harbin

来源：

Surface Technology | 2021年 / 50卷 / 04期

基金：

中国国家自然科学基金;

关键词：

Friction and wear; Graphene; Mechanical properties; Selective laser melting; Stainless steel;

D O I：

10.16490/j.cnki.issn.1001-3660.2021.04.003

中图分类号：

学科分类号：

摘要：

Friction and wear of stainless-steel materials is a great waste of economy and energy. Graphene with high strength provides a new way, to improve the wear resistance of stainless-steel materials. The combination of the two materials is of great significance to the industrial field. According to the combination mode of graphene and stainless-steel materials, the research progress on the application of graphene in the friction and wear of stainless-steel materials was summarized. From the processing to the application of stainless-steel materials, the law of graphene reducing the friction coefficient of stainless steel was revealed. As a cutting fluid additive, graphene nanoparticles can greatly reduce the friction coefficient of the friction interface between stainless steel and the tool, thus improving the surface quality of stainless-steel workpiece. Preparation followed by transfer is still the main way for graphene to be applied to stainless steel surface. Graphene acts on the friction interface in the form of solid lubricant, and the wear rate of stainless-steel surface can be reduced by an order of magnitude. The continuous development of laser melting additive manufacturing technology provides an effective way for graphene reinforced stainless steel composites, greatly promotes the process of engineering application of the material, and provides a new research direction for graphene to reduce the friction and wear of stainless-steel materials. Finally, through the research on the reduction of friction and wear of stainless-steel materials by graphene, some problems existing in the current research are pointed out and possible solutions are proposed, and the application prospect of this direction is prospected. © 2021, Chongqing Wujiu Periodicals Press. All rights reserved.

引用

页码：43 / 55

页数：12

共 80 条

[31]

Faggio G., Messina G., Lofaro C., Et al., Recent advancements on the CVD of Graphene on copper from ethanol vapor[J], Journal of Carbon Research, 6, 1, (2020)

[32]

Saeed M., Alshammari Y., Majeed S A., Et al., Chemical vapour deposition of graphene-synthesis, chara-cterisation, and applications: A review[J], Molecules, 25, 17, (2020)

[33]

Ren Zhuang W.A.N.G.J.-B., Ying H.O.U., Et al., A review of graphene synthesis at low temperatures by CVD me-thods[J], New Carbon Materials, 35, 3, pp. 193-207, (2020)

[34]

Duan Xiang-Yang X.U.K., Yan L.I., Et al., Research on rapid growth of monolayer graphene by vertical cold-wall CVD method[J], Journal of Experimental Nanoscience, 15, 1, pp. 417-426, (2020)

[35]

Nagai Y., Sugime H., Noda S., 1.5 minute-synthesis of continuous graphene films by chemical vapor deposition on Cu foils rolled in three dimensions[J], Chemical Engineering Science, 201, pp. 319-324, (2019)

[36]

Eres Z., Hrabar S., Low-cost synthesis of high-quality graphene in do-it-yourself CVD reactor[J], Automatika, 59, 3-4, pp. 254-260, (2018)

[37]

Fidanova T., Petrov S., Napoleonov B., Et al., Single and multilayer graphene grown by CVD technique: Characterization for electro-optical applications[J], Acc Chem Res, 53, 4, pp. 800-811, (2020)

[38]

Li Hong L.I.U.W., Chuan X.U., Et al., Synthesis of high-quality monolayer and bilayer graphene on copper using chemical vapor deposition[J], Carbon, 49, 13, pp. 4122-4130, (2011)

[39]

Cai Wei-Wei L.I.X.-S., Jin-Bo A.N., Et al., Large-area synthesis of high-quality and uniform graphene films on copper foils[J], Science, 324, 5932, pp. 1312-1314, (2009)

[40]

Zhou Yun-Shen Q.I.A.N.M., Yang G.A.O., Et al., Production of few-layer graphene through liquid-phase pulsed laser exfoliation of highly ordered pyrolytic graphite[J], Applied Surface Science, 258, 22, pp. 9092-9095, (2012)

← 1 2 3 4 5 6 7 8 →