Axial compression performance test and bearing capacity calculation of L-shaped section partially encased composite steel-concrete columns

被引：0
|
作者：
Mao, Jiayue [1 ]
Liu, Yong [1 ,2 ,3 ]
Wang, Jingfeng [1 ,4 ,5 ]
Tao, Shuqing [1 ]
机构：
[1] College of Civil Engineering, Hefei University of Technology, Hefei,230009, China
[2] Key Laboratory of Earthquake Engineering and Engineering Vibration, Institute of Engineering Mechanics, China Earthquake Administration, Harbin,150080, China
[3] Key Laboratory of Earthquake Disaster Mitigation, Ministry of Emergency Management, Harbin,150080, China
[4] Anhui Advanced Steel Structure Technology and Industrialization Collaborative Innovation Center, Hefei University of Technology, Hefei,230009, China
[5] Anhui Provincial Key Laboratory of Civil Engineering Structures and Materials, Hefei University of Technology, Hefei,230009, China
来源：
Jianzhu Jiegou Xuebao/Journal of Building Structures | 2024年 / 45卷 / 10期
关键词：
To study the axial compression performance of L-shaped partially encased composite steel-concrete (LPEC) columns; axial compression tests of six LPEC short columns were conducted. The influence of critical parameters; such as steel content; link spacing and section aspect ratio; on the load-displacement curve; bearing capacity; stiffness; ductility coefficient and bearing capacity improvement coefficient of LPEC short columns was investigated. The typical failure mode and load-bearing mechanism of LPEC short columns were revealed. Results indicate that the LPEC column has good mechanical performance; and its failure modes are mainly concrete crushing in the middle of the column and local buckling of the section steel flange. Meanwhile; concrete collapse at the end of the column and link breaking around the weld seam also occur in some specimens. Increasing the steel content and decreasing the link spacing can obviously improve the confinement effect of concrete; and then improve the bearing capacity and ductility of the specimen; whereas the influence of the section aspect ratio on the bearing capacity is not significant. In addition; for LPEC columns; the axial compression bearing capacities calculated by the steel-concrete composite column bearing capacity formulas given in the specifications ACI318-14; Eurocode 4 and T/ CECS 719—2020 ‘Technical specification for partially-encased composite structures of steel and concrete’ are conservative due to failing to consider the concrete confinement effect. Based on the superposition principle; a simplified calculation method for the axial compression bearing capacity of LPEC columns considering the confinement effect of concrete was proposed; and the calculated results are in good agreement with the experimental results. © 2024 Science Press. All rights reserved;
D O I：
10.14006/j.jzjgxb.2023.0499
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：87 / 96
相关论文
共 50 条
  • [31] Experimental study on axial compression performance and bearing capacity calculation of CFRP-steel confined ocean concrete columns
    Chen Z.
    Pang Y.
    Xu R.
    Zhou J.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2023, 44 (07): : 116 - 128
  • [32] Bearing capacity of welded composite T-shaped concrete-filled steel tubular columns under axial compression
    Cao, Bing
    Zhang, Xuyan
    Liang, Nan
    Yang, Yizhen
    Shen, Dekang
    Huang, Bo
    Du, Yi-han
    ADVANCES IN MECHANICAL ENGINEERING, 2020, 12 (05)
  • [33] Practical fire design of partially encased composite steel-concrete columns according to Eurocode 4
    Arezki, Sadaoui
    Said, Illouli
    INTERNATIONAL CONGRESS ON MATERIALS & STRUCTURAL STABILITY, 2014, 11
  • [34] Experimental Study on L-shaped Concrete-filled Steel Tubular Columns under Axial Compression and Eccentric Compression
    Hu Z.
    He R.
    Liu J.
    Wang M.
    Zhang J.
    Journal of Engineering Science and Technology Review, 2024, 17 (02) : 175 - 181
  • [35] Calculation on flexural bearing capacity of composite HSHP concrete encased steel beams
    Che, Shunli
    Zheng, Shansuo
    Zhao, Qin
    Li, Lei
    Zhang, Liang
    Gong, Anli
    PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE ON STEEL, SPACE & COMPOSITE STRUCTURES, 2007, : 679 - 683
  • [36] Restraint mechanism and bearing capacity calculation of steel-concrete composite square columns with internal spiral bars
    Zhou J.
    Chen Z.
    Zhou C.
    Jing C.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2022, 43 (11): : 235 - 246+265
  • [37] Analysis of the composite effect of partially concrete-encased H-shaped steel composite columns
    Yin, Z.Z.
    Chen, S.L.
    Liang, Y.X.
    Chen, W.
    Materials Research Innovations, 2015, 19 : 133 - 138
  • [38] Study on the mechanical behavior of L-shaped concrete-filled steel tubular columns under axial compression
    Huang, Hong
    Wang, Yi
    Zhang, Liqing
    Chen, Mengcheng
    Zhu, Yanqi
    STRUCTURAL CONCRETE, 2023, 24 (02) : 2475 - 2489
  • [39] Design of L-shaped and T-shaped concrete-filled steel tubular stub columns under axial compression
    Zheng, Yongqian
    Zeng, Shaoxi
    ENGINEERING STRUCTURES, 2020, 207
  • [40] Bearing performance analysis of steel plate section steel-concrete composite slabs
    Wang, Tie-Cheng
    Zhao, Ling-Zhi
    Wei, Zhuo-Bin
    Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2005, 37 (SUPPL. 2): : 280 - 284
12345