A Novel Noiseless Burst Mode Control of Half-Bridge LCC Resonant Converter Based on Simplified State Trajectory

被引：0
|
作者：
Zhao J. [1 ]
Lin H. [1 ]
Sun X. [1 ]
Wu L. [1 ]
Chen G. [1 ]
机构：
[1] College of Electrical Engineering, Zhejiang University, Hangzhou
来源：
Chen, Guozhu (gzchen@zju.edu.cn) | 2021年 / China Machine Press卷 / 36期
关键词：
Burst mode; Half-bridge LCC resonant converter; Noise suppression; Simplified state trajectory; State trajectory control;
D O I：
10.19595/j.cnki.1000-6753.tces.201644
中图分类号：
学科分类号：
摘要：
When the half-bridge LCC resonant converter works in light load mode, its high switching frequency and large reactive power in the resonant circuit reduce the efficiency of the converter significantly. Burst mode is an effective method to improve the light load efficiency of the converter. However, the conventional burst mode will cause the voltage and current to oscillate and further increase the loss, and even cause the transformer to saturate. In this paper, the simplified state sub-trajectories of different modes of half-bridge LCC converter were derived, and the state trajectory control strategy of the burst mode for half-bridge LCC converter was derived. By controlling the switching time of the half-bridge, there is no oscillation during burst off time, which makes the half-bridge LCC converter work in high efficiency stably. Besides, considering the noise pollution problem of burst mode under extremely light load conditions, the improved control is proposed based on the simplified state trajectory to ensure that the LCC converter works outside the audible band to avoid noise. Finally, an experimental prototype was built. The experimental results show that the proposed method can significantly improve the light load efficiency of the half-bridge LCC converter, and eliminate the oscillation and noise pollution of the resonant circuit. © 2021, Electrical Technology Press Co. Ltd. All right reserved.
引用
收藏
页码：4215 / 4224
页数：9
相关论文
共 22 条
  • [1] Xia Bing, Ruan Xinbo, Chen Wu, Analysis and design of LCC resonant converter for high voltage and high power applications, Transactions of China Electrotechnical Society, 24, 5, pp. 60-66, (2009)
  • [2] Zhang Hongyin, Tong Chaonan, Wang Zeting, Normalized analysis and design of DCM-LCC resonant converter based on critical current mode, Transactions of China Electrotechnical Society, 34, 1, pp. 103-115, (2019)
  • [3] Liu Jun, Guo Tangtang, Chang Lei, Et al., Effects of the parasitic capacitance on characteristics of series resonant converters, Proceedings of the CSEE, 32, 15, pp. 16-23, (2012)
  • [4] Wu Liang, Sun Xiaowei, Zhao Jun, Et al., Analysis of output voltage imbalance for cascaded multi-module LCC converters based on large-signal model, Transactions of China Electrotechnical Society, 35, 24, pp. 5142-5151, (2020)
  • [5] (2017)
  • [6] (2012)
  • [7] Fan Shengwen, Li Haisi, Wang Zeting, Et al., Trajectory analysis of LCC resonant converter for high voltage electron beam welder, Power Electronics, 52, 7, pp. 57-60, (2018)
  • [8] Wu Liang, Zhao Jun, Lin Hongyi, Et al., State trajectory control of start-up for LCC resonant converters with capacitive output filter, IEEE Journal of Emerging and Selected Topics in Power Electronics, 9, 2, pp. 2317-2327, (2021)
  • [9] Zhang Zhiguo, Xie Yunxiang, Yuan Zhaomei, Analysis of circuit characteristics of LCC resonant converter, Transactions of China Electrotechnical Society, 28, 4, pp. 50-57, (2013)
  • [10] Li Zhenyu, Zhao Jun, Chen Zheng, Et al., A design method for LCC resonant converter over wide load range with wide-range input and output, IEEE PES Asia-Pacific Power and Energy Engineering Conference, pp. 1-6, (2019)
123