A unified calibration method for robot manipulators: hand-eye parameters, kinematic parameters and TCP position calibration

PurposeThe purpose of the paper is to propose an efficient, simple and concise unified robot calibration method that simultaneously considers errors in hand-eye parameters, kinematic parameters and tool center point (TCP) position.Design/methodology/approachThis paper proposes a unified robot calibration method. First, the initial hand-eye matrix and TCP position are computed without considering kinematic parameter errors. Second, the nominal TCP positions in the laser tracker coordinate system {S} are computed. The actual TCP positions in {S} are directly measured. Third, a unified parameter error calibration model is established, and the sequential quadratic programming algorithm is used for error identification. Finally, the identified errors are used for direct error compensation.FindingsSimulation results prove that the proposed scheme can accurately calibrate the hand-eye parameters, kinematic parameters and TCP position simultaneously. Experimental results reveal that the maximum value of the absolute positioning errors is reduced from 5.4725 mm to 0.4095 mm (reduced by 92.52%). Thus, the proposed approach meets the accuracy requirements of most robotic applications.Originality/valueThe main contributions of this paper are: (1) this scheme is efficient. The method can achieve fully automatic calibration by incorporating Kronecker products for the initial hand-eye matrix and TCP position computation. Thereby significantly improving the calibration efficiency and liberating the labor force. (2) This scheme is simple and concise. The hand-eye parameters, kinematic parameters and TCP position errors are modeled in a unified framework. Furthermore, the related redundant parameters are deleted.