Distributed Protection Scheme for DC Distribution Network Based on Current Transients

被引：0
|
作者：
Liu Y. [1 ,2 ]
Chen J. [1 ,2 ,5 ]
Li J. [3 ]
Hou W. [1 ,2 ]
Li J. [3 ]
Xu Q. [5 ]
机构：
[1] NARI Group Corporation, State Grid Electric Power Research Institute, Nanjing
[2] NR Electric Co., Ltd., Nanjing
[3] Electric Power Research Institute of State Grid Jiangsu Electric Power Co., Ltd., Nanjing
[4] Suzhou Power Supply Company, State Grid Jiangsu Electric Power Co., Ltd., Suzhou
[5] School of Electrical Engineering, Southeast University, Nanjing
来源：
Dianli Xitong Zidonghua/Automation of Electric Power Systems | 2021年 / 45卷 / 05期
关键词：
Current transient; DC distribution network; Fault characteristic; Fault location; Network protection;
D O I：
10.7500/AEPS20200321002
中图分类号：
学科分类号：
摘要：
Low-voltage DC distribution network has the characteristics of short duration of fault current, variable system operation mode and fault current oscillation, which challenges the correct judgment and fault location of relay protection. In this paper, the fault characteristics of low-voltage DC distribution networks are analyzed in detail, and a DC network protection scheme including the current direction comparison method, direction prediction method and extreme value comparison method is proposed. The protection unit with the proposed scheme can quickly locate the fault area and complete the fault clearing and isolation after the DC distribution network fault occurs. In order to facilitate the engineering application of the protection scheme, the generic object oriented substation event (GOOSE) communication is used to realize the information exchange between the protection units, and the protection strategy of "instant memory of single branch, delayed location of multi-branch" is proposed to solve the practical problems such as short duration of fault current and asynchronous data transmission. Real-time digital simulation (RTDS) test results show that the protection can correctly identify the fault area within 5 ms after the fault occurs. © 2021 Automation of Electric Power Systems Press.
引用
收藏
页码：159 / 167
页数：8
相关论文
共 24 条
  • [1] JIANG Daozhuo, ZHENG Huan, Research status and developing prospect of DC distribution networks, Automation of Electric Power Systems, 36, 8, pp. 98-103, (2012)
  • [2] YAN Sheng, LUO Xiang, HE Zhiyuan, Prospect of core equipment and key technology for DC power grid, Automation of Electric Power Systems, 43, 3, pp. 205-215, (2019)
  • [3] MA Zhao, JIAO Zaibin, LI Rui, Network structures and key technologies of DC distribution systems, Power System Technology, 41, 10, pp. 3348-3357, (2017)
  • [4] WANG Dan, MAO Chengxiong, LU Jiming, Et al., Technical analysis and design concept of DC distribution system, Automation of Electric Power Systems, 37, 8, pp. 82-88, (2013)
  • [5] YONG Jing, XU Xin, ZENG Liqiang, Et al., A review of low voltage DC power distribution system, Proceedings of the CSEE, 33, 7, pp. 42-52, (2013)
  • [6] WANG Dan, LIU Yiran, LIANG Xiang, Et al., DC distribution network voltage class series, Automation of Electric Power Systems, 39, 9, pp. 19-25, (2015)
  • [7] SUN Pengfei, HE Chunguang, SHAO Hua, Et al., Research status and development of DC distribution network, Electric Power Automation Equipment, 36, 6, pp. 64-73, (2016)
  • [8] BARAN M E, MAHAJAN N R., Overcurrent protection on voltage-source-converter-based multiterminal DC distribution systems, IEEE Transactions on Power Delivery, 22, 1, pp. 406-412, (2007)
  • [9] JIAO Zaibin, WANG Zhao, WANG Xiaobing, Et al., Protection schemes for distribution lines in DC power grid, IEEE Innovative on Smart Grid Technologies-Asia (ISGT ASIA), pp. 1-6, (2015)
  • [10] LI Bin, HE Jiawei, LI Ye, Et al., Single-ended protection scheme based on boundary characteristic for the multi-terminal VSC-based DC distribution system, Proceedings of the CSEE, 36, 21, pp. 5741-5749, (2016)
123