Numerical Simulation of Interface Charge Behaviors Between LDPE/EPDM for HVDC Cable Accessory Insulation Based on the Bipolar Charge Transport Model

被引:0
|
作者
Li J. [1 ]
Liang H. [1 ]
Du B. [1 ]
Song P. [2 ]
Kong X. [1 ]
Li Z. [1 ]
机构
[1] Key Laboratory of Smart Grid of Ministry of Education, Tianjin University, Tianjin
[2] Electric Power Research Institute, State Grid Tianjin Electric Power Company, Tianjin
来源
Du, Boxue (duboxue@tju.edu.cn) | 2018年 / Science Press卷 / 44期
基金
中国国家自然科学基金;
关键词
Bipolar charge transport model; Carrier mobility; Electrical field distribution; HVDC cable accessory; Interface barrier; Interface charge; Surface state;
D O I
10.13336/j.1003-6520.hve.20180430007
中图分类号
学科分类号
摘要
HVDC extruded cable is the key equipment of flexible DC transmission technology. However, the interface charge between different dielectrics is easy to accumulate in the HVDC cable accessories due to the discontinuity of conductivity and permittivity, which will threaten the safety of the HVDC cable system. So, the injection and transportation behaviors of space charge in ethylene propylene diene monomer (EPDM)/low-density polyethylene (LDPE) bi-layer dielectrics were simulated by using a bipolar charge transport model with different interface characteristics including the surface states, interface barrier and carrier mobility. Furthermore, the influence of interface charge accumulation on the electrical field distribution in HVDC cable accessory was analyzed. The simulation and test results show that the interface charge density in HVDC cable accessory is increased by the deep surface trap energy level, high interface barrier and large carrier mobility difference. The accumulation of interface charge makes the electrical field distribution more distorted. Therefore, interface charge accumulation in the HVDC cable accessory can be suppressed by improving the surface state distribution and matching degree of carrier mobilities and decreasing the interface barrier. © 2018, High Voltage Engineering Editorial Department of CEPRI. All right reserved.
引用
收藏
页码:1443 / 1449
页数:6
相关论文
共 24 条
  • [11] Lan L., Effect of temperature on space charge distribution in polymer insulation, (2015)
  • [12] Baudoin F., Roy S.L., Teyssedre G., Et al., Bipolar charge transport model with trapping and recombination: an analysis of the current versus applied electric field characteristic in steady state conditions, Journal of Physics D: Applied Physics, 41, 2, (2008)
  • [13] Roy S.L., Teyssedre G., Laurent C., Charge transport and dissipative processes in insulating polymers: experiments and model, IEEE Transactions on Dielectrics and Electrical Insulation, 12, 4, pp. 644-654, (2005)
  • [14] Zhong X., Zheng Y., Dang B., Et al., Polarity effect on space charge distributions in polymer under DC electric field, Proceedings of the CSEE, 36, 24, pp. 6693-6701, (2016)
  • [15] Wu J., Charge transport investigation in low-density polyethylene/silica nanocomposite based on experiment and numerical simulation, (2012)
  • [16] Belgaroui E., Boukhris I., Kallel A., Et al., A new numerical model applied to bipolar charge transport, trapping and recombination under low and high DC voltages, Journal of Physics D: Applied Physics, 40, 21, pp. 6760-6767, (2007)
  • [17] Li J., Suppressing interface charge between LDPE and EPDM for HVDC cable accessory insulation, (2017)
  • [18] Du B.X., Li J., Du Q., Et al., Surface charge and flashover voltage of EVA/CB nanocomposite under mechanical stresses, IEEE Transactions on Dielectrics and Electrical Insulation, 23, 6, pp. 3734-3741, (2017)
  • [19] Li J., Du B.X., Kong X.X., Et al., Nonlinear conductivity and interface charge behaviors between LDPE and EPDM/SiC composite for HVDC cable accessory, IEEE Transactions on Dielectrics and Electrical Insulation, 24, 3, pp. 1566-1573, (2017)
  • [20] Taleb M., Teyssedre G., Roy S.L., Et al., Modeling of charge injection and extraction in a metal/polymer interface through an exponential distribution of surface states, IEEE Transactions on Dielectrics and Electrical Insulation, 20, 1, pp. 311-320, (2013)