Temperature calibration of distributed optical fiber temperature sensor based on raman scattering

被引：0

作者：

Tang, Yu-Quan ^{[1
]}

Sun, Miao ^{[1
,2
]}

Li, Jun ^{[1
]}

Yang, Shuang ^{[1
]}

Brian, Culshaw ^{[3
]}

Dong, Feng-Zhong ^{[1
,2
]}

机构：

[1] Anhui Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Anhui Provincial Key Laboratory of Photonic Devices and Materials, Hefei

[2] University of Science and Technology of China, College of Environmental Science and Optoelectronics Technologies, Hefei

[3] University of Strathclyde, Department of Electrical and Electronics Engineering

来源：

Guangzi Xuebao/Acta Photonica Sinica | 2015年 / 44卷 / 05期

关键词：

Distributed optical fiber temperature sensor; Fiber attenuation; Fiber optics; Raman scattering; Temperature calibration;

D O I：

10.3788/gzxb20154405.0506006

中图分类号：

学科分类号：

摘要：

The main causes of the temperature measurement error of Raman distributed optical fiber temperature sensor was researched and discussed based upon the Raman scatting principle and temperature demodulation algorithm. A method to address the effects caused by the attenuation differences between Stokes and anti-Stokes light, additional attenaution of fiber bending, stress and environment changes was proposed. Furthermore, the measurement error caused by dark current produced by the detector was also reduced by using nonlinear equations with three different temperature signals acquired along the same-fiber section location. The experimental results demonstrate that the aritmatic mean error of calibrated system has reduced from 8.0℃ to 0.37℃ with the fiber location found at 900 m. Overall, a temperature arithmatic mean error better than 0.6℃ is achieved. ©, 2015, Chinese Optical Society. All right reserved.

引用

页数：5

共 12 条

[1]

Wang Z.L., Zhang S.S., Chang J., Et al., Adaptive data acquisition algorithm in Raman distributed temperature measurement system, Optik-International Journal for Light and Electron Optics, 125, 7, pp. 1821-1824, (2014)

[2]

Bolognini G., Hartog A., Raman-based fibre sensors: Trends and applications, Optical Fiber Technology, 19, 6, pp. 678-688, (2013)

[3]

Wang J.-F., Liu H.-L., Zhang S.-Q., Et al., New type distributed optical fiber temperature sensor (DTS) based on raman scattering and its' application, Spectroscopy and Spectral Analysis, 33, 4, pp. 865-870, (2013)

[4]

Yu X.-D., Zhang Z.-X., Zhu H.-Z., Et al., An intelligent temperature compensating circuit for distributed optical fiber raman temperature sensor, Acta Photonica Sinica, 40, 12, pp. 1870-1874, (2011)

[5]

Lin Q., Yaman F., Agrawal G.P., Photon-pair generation in optical fibers through four-wave mixing: Role of Raman scattering and pump polarization, Physical Review A, 75, 2, (2007)

[6]

Zhang L.-X., Ou Z.-H., Liu Y.-Z., Et al., A circulated demodulated method of distributed fiber raman temperature sensor, Acta Photonica Sinica, 34, 8, pp. 1176-1178, (2005)

[7]

Wang Z., Chang J., Zhang S., Et al., Theoretical analysis of the impact of Rayleigh noise on the performance of distributed Raman temperature sensors, Journal of Modern Optics, 61, 4, pp. 286-296, (2014)

[8]

Ma X., Chang J., Wang L., Et al., Using multiple reference points in raman based distributed temperature sensor for eliminating DC interference, IEEE Sensors Journal, 1, 14, pp. 295-301, (2014)

[9]

Wang Z.L., Zhang S.S., Chang J., Et al., Attenuation auto-correction method in Raman distributed temperature measurement system, Optical and Quantum Electronics, 45, 10, pp. 1087-1094, (2013)

[10]

Stoddart P.R., Cadusch P.J., Pearce J.B., Et al., Fibre optic distributed temperature sensor with an integrated background correction function, Measurement Science and Technology, 16, 6, (2005)

← 1 2 →