Spectroscopic diagnostics of rotational temperature in the pulsed atmospheric air plasma

被引：0

作者：

Key Laboratory of Pulsed Power, Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900, China ^{[1
]}

机构：

[1] Key Laboratory of Pulsed Power, Institute of Fluid Physics, China Academy of Engineering Physics

来源：

Dong, P. (panner95@163.com) | 1600年 / Science Press卷 / 39期

关键词：

Dielectric barrier discharge; Nanosecond pulse; Optical emission spectroscopy; Pulse parameters; Relative intensity; Rotational temperature;

D O I：

10.3969/j.issn.1003-6520.2013.10.035

中图分类号：

学科分类号：

摘要：

Dielectric barrier discharge (DBD) attracts lots of attentions for its great application promises, and the rotational temperature is one of its mostly important parameters. In order to measure the rotational temperature of a pulsed DBD in atmospheric air, the temperature is studied by using optical emission spectroscopy (OES). The discharge is excited by a high voltage pulse with 124 ns rise time and 230 ns full width at half maximum (FWHM) at a repetition rate of a few hundred hertz. The rotational temperatures are studied using different voltages, different repetition rates of the pulse power supply, and different gaps between dielectrics: They are in the range from 390 K to 500 K during the whole discharge. When the gap between dielectrics increases, the rotational temperature initially decreases and then increases. The rotational temperature changes complexly when the pulse repetition rate changes. When the voltage increases, the rotational temperature always decreases, which is not expected. These results allow one to predict the rotational temperature at different supply power parameters and electrode configurations, which is useful for the DBD's industrial application.

引用

页码：2568 / 2572

页数：4

共 15 条

[1]

Dockery K.P., Sieber K.D., Knapp F.A., Et al., Surface acid chemistry associated with dielectric barrier discharge (DBD) treatment of polyethylene, Plasma Sources Science and Technology, 16, 1, pp. 42-49, (2007)

[2]

Chen Q., Zhang Y.F., Han E., Et al., Atmospheric pressure DBD gun and its application in ink printability, Plasma Sources Science and Technology, 14, 4, pp. 670-675, (2005)

[3]

Celestin S., Boussard G.C., Guaitella O., Et al., Influence of the charges deposition on the spatio-temporal self-organization of streamers in a DBD, Journal of Physics D: Applied Physics, 41, 20, (2008)

[4]

Wang X., Dielectric barrier discharge and its applications, High Voltage Engineering, 35, 1, pp. 1-11, (2009)

[5]

Walsh J.L., Kong M.G., 10 ns pulsed atmospheric air plasma for uniform treatment of polymeric surfaces, Applied Physics Letters, 91, 25, (2007)

[6]

Shao T., Zhang C., Yu Y., Et al., Study on homogeneous nanosecond-pulse dielectric barrier discharge in atmospheric air, High Voltage Engineering, 38, 5, pp. 1045-1050, (2012)

[7]

Jiang H., Shan T., Che X., Et al., Experimental study on the factors influencing nanosecond-pulsed surface discharge plasma, High Voltage Engineering, 38, 7, pp. 1704-1710, (2012)

[8]

Walsh J.L., Shi J.J., Kong M.G., Submicrosecond pulsed atmospheric glow discharges sustained without dielectric barriers at kilohertz frequencies, Applied Physics Letters, 89, 16, (2006)

[9]

Verreycken T., Schram D.C., Leys C., Et al., Spectroscopic study of an atmospheric pressure dc glow discharge with a water electrode in atomic and molecular gases, Plasma Sources Science and Technology, 19, 4, (2010)

[10]

Qi B., Huang J., Fan Z., Et al., Two-dimensional distribution of rotational and vibrational temperatures at atmospheric pressure cold plasma jet, Journal of Shenzhen University (Science and Engineering), 26, 2, pp. 208-212, (2009)

← 1 2 →