Effect of fiber volume fraction on modal properties of three-dimension braided composite t-beams

被引：0
|
作者：
Tianjin and Ministry of Education Key Laboratory of Advanced Textile Composite Materials, Institute of Composite Materials, Tianjin Polytechnic University, Tianjin [1 ]
300387, China
机构：
来源：
Cailiao Gongcheng | / 9卷 / 80-86期
关键词：
Modal analysis - Carbon fibers - Volume fraction - Composite materials - Damping;
D O I：
10.11868/j.issn.1001-4381.2015.09.013
中图分类号：
学科分类号：
摘要：
The modal properties of carbon fiber three-dimension and four-direction braided composite T-beams with different fiber volume fractions were studied by the free vibration method of cantilever beams. The effect of fiber volume fraction on natural frequency and damping was analyzed. The measured and finite element calculated results of natural frequency were compared. The results show that the modal properties of T-beams have nothing to do with the position of excitation point. The natural frequency of the composite T-beams increases and damping properties of the composite T-beams decrease with the increasing of fiber volume fraction. The order of the natural frequency of T-beam could be estimated accurately by the mode shape. The measured results are in agreement with the calculated results. ©, 2015, Beijing Institute of Aeronautical Materials (BIAM). All right reserved.
引用
收藏
相关论文
共 50 条
  • [21] Natural frequencies of composite beams with a variable fiber volume fraction including rotary inertia and shear deformation
    Y. Bedjilili
    A. Tounsi
    H. M. Berrabah
    I. Mechab
    E. A. Adda Bedia
    S. Benaissa
    Applied Mathematics and Mechanics, 2009, 30 : 717 - 726
  • [22] Natural frequencies of composite beams with a variable fiber volume fraction including rotary inertia and shear deformation
    Bedjilili, Y.
    Tounsi, A.
    Berrabah, H. M.
    Mechab, I.
    Bedia, E. A. Adda
    Benaissa, S.
    APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, 2009, 30 (06) : 717 - 726
  • [23] Investigation of bending properties of continuous fiber reinforced resin T-beams made by 3D printing
    Wu, Siyuan
    Shan, Zhongde
    Chen, Ken
    Liu, Xiaojun
    Jiang, Xibin
    Wang, Shaozong
    Ren, Yongxin
    STRUCTURES, 2023, 50 : 835 - 841
  • [24] Effect of Fiber Volume Fraction on the Flexural Properties of Unidirectional Carbon Fiber/Epoxy Composites
    He, Hong-wei
    Gao, Feng
    INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION, 2015, 20 (02) : 180 - 189
  • [25] Effect of temperature on bending properties and failure mechanism of three-dimensional braided composite
    Li, Diansen
    Fang, Daining
    Zhang, Guobing
    Hu, Hong
    MATERIALS & DESIGN, 2012, 41 : 167 - 170
  • [26] The effect of piezoceramic volume fraction on properties of three-phase piezocomposites
    Xu, Junan
    Wang, Likun
    Zhong, Chao
    FERROELECTRICS, 2020, 555 (01) : 132 - 145
  • [27] Bending properties of three-dimensional braided composite T-beam at low temperature
    Liu J.
    Liu K.
    Ning B.
    Sun B.
    Zhang W.
    Fangzhi Xuebao/Journal of Textile Research, 2019, 40 (12): : 57 - 62
  • [28] Effect of fiber volume fraction on thermal conductivity of a woven-mat composite lamina
    Golestanian, Hossein
    HT2005: Proceedings of the ASME Summer Heat Transfer Conference 2005, Vol 3, 2005, : 137 - 144
  • [29] Effect of Carbon Fiber Volume Fraction on Mechanical Behavior of Carbon Fibre Composite Rod
    Xu, Li-ying
    Zheng, Chen-wei
    2018 INTERNATIONAL CONFERENCE ON COMPUTER, COMMUNICATIONS AND MECHATRONICS ENGINEERING (CCME 2018), 2018, 332 : 463 - 467
  • [30] Effect of fiber orientation and fiber volume fraction on the mechanical properties of all-polyamide composites
    Cordin, Michael
    Manian, Avinash P.
    Bechtold, Thomas
    Pham, Tung
    JOURNAL OF APPLIED POLYMER SCIENCE, 2023, 140 (41)
12345