Effect of pre-tensile stress on welding residual stress filed in butt-welded dissimilar flat plates

被引:0
作者
Zhao, Dong-Sheng [1 ]
Wu, Guo-Qiang [2 ]
Liu, Yu-Jun [1 ]
Sun, Min-Ke [1 ]
Ji, Zhuo-Shang [1 ]
机构
[1] State Key Laboratory of Structural Analysis for Industrial Equipment, School of Naval Architecture Engineering, Dalian University of Technology
[2] State Key Laboratory of Structural Analysis for Industrial Equipment, School of Aeronautics and Astronautics, Dalian University of Technology
来源
Chuan Bo Li Xue/Journal of Ship Mechanics | 2013年 / 17卷 / 08期
关键词
Pre-tension; Q235; steel; Stainless steel; Temperature filed; Welding residual stress;
D O I
10.3969/j.issn.1007-7294.2013.08.010
中图分类号
学科分类号
摘要
Thermal Elasto-plastic finite element method was used to simulate the welding residual stresses in butt-welded Q235 and 304 Stainless Steel plates with different pre-tensile stresses. The simulation results indicate that the welding residual stresses present asymmetric distribution, peak of longitudinal residual stress tends to be in 304 stainless steel side. Pre-tensile stress can decrease the longitudinal residual stress significantly, and the more the pre-loads, the lower the longitudinal residual stresses. An infrared thermal imager was also applied to measure surface temperature changing of welding materials in welding process, the results are accordant with that drawn from elasto-plastic finite element measurement.
引用
收藏
页码:920 / 924
页数:4
相关论文
共 50 条
[41]   Study on the Effect of Preheating Temperature on Residual Stress in Laser Arc Composite Welding of Dissimilar Aluminum Alloys [J].
Chen, Xiaowen ;
Tang, Song ;
Xie, Wanlin ;
Zhang, Meng ;
Song, Hao ;
Ran, Qingzheng ;
Zhang, Defen .
JOM, 2024, 76 (07) :3832-3839
[42]   Finite element analysis of temperature field, microstructure and residual stress in multi-pass butt-welded 2.25Cr-1Mo steel pipes [J].
Deng, Dean ;
Murakawa, Hidekazu .
COMPUTATIONAL MATERIALS SCIENCE, 2008, 43 (04) :681-695
[43]   Investigation of Clamping Effect on the Welding Residual Stress and Deformation of Monel Plates by Using the Ultrasonic Stress Measurement and Finite Element Method [J].
Javadi, Yashar .
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2015, 137 (01)
[44]   The Effect of the Welding on the Residual Contact Stress in the Expanded Zone of Expanded-Welded Tube-to-Tubesheet Joints [J].
Wang, H. F. ;
Sang, Z. F. ;
Widera, G. E. O. .
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2011, 133 (06)
[45]   Influence of groove type on welding-induced residual stress, deformation and width of sensitization region in a SUS304 steel butt welded joint [J].
Ye, Yanhong ;
Cai, Jianpeng ;
Jiang, Xiaohua ;
Dai, Deping ;
Deng, Dean .
ADVANCES IN ENGINEERING SOFTWARE, 2015, 86 :39-48
[46]   Effect of welding residual stress on hydrogen-induced fracture and fatigue life of X80 pipeline girth welded joints [J].
Tang, Hai ;
Shen, Chutian ;
Xu, Meng ;
Zheng, Wei ;
Sun, Chen ;
Lv, Liangliang ;
Wei, Haotian ;
Wei, Liang ;
Hua, Zhengli .
ENGINEERING FRACTURE MECHANICS, 2025, 325
[47]   Numerical and experimental studies on the effect of cryogenic treatment on welding residual stress of TIG welded EN8 steel plate [J].
Sivasubramaniyan, N. S. ;
Menon, Vignesh Rajeev ;
Varghese, V. M. Joy ;
Thomas, Rijo Jacob .
WELDING INTERNATIONAL, 2024, 38 (10) :712-722
[48]   Welding residual stress effect of the fatigue strength at dissimilar material weld between Alloy617 and 12Cr steel [J].
Hwang, Jeong Ho ;
Lee, Ju Hwa ;
Bae, Dong Ho .
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2018, 32 (19)
[49]   Welding Residual Stress Analysis and Fatigue Strength Assessment of Multi-Pass Dissimilar Material Welded Joint between Alloy 617 and 12Cr Steel [J].
Ahmad, Hafiz Waqar ;
Hwang, Jeong Ho ;
Lee, Ju Hwa ;
Bae, Dong Ho .
METALS, 2018, 8 (01)
[50]   Effect of ultrasonic impact treatment on welding residual stress and fatigue resistance of doubly-welded rib-to-deck joints in OSD [J].
Han, Shao-hui ;
Cui, Chuang ;
Zheng, Qiu-song ;
Zhang, Qing-hua ;
Bu, Yi-zhi .
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2023, 211