Improving the Performance of FINEMET Nanocrystalline Magnetic Powder Core by a Revamped Process and the Corresponding Mechanism

被引:0
作者
Li Q. [1 ]
Guo J. [1 ]
Hu J. [1 ]
Wang H. [1 ]
Lian F. [2 ]
Lu C. [3 ]
机构
[1] College of Engineering, Heilongjiang August First Land Reclamation University, Daqing
[2] Key Laboratory for Anisotropy and Texture of Materials of Ministry of Education, Northeastern University, Shenyang
[3] Advance Technology and Materials Co., Ltd., Beijing
来源
| 2017年 / Cailiao Daobaoshe/ Materials Review卷 / 31期
关键词
Annealing; FINEMET; Loss; Magnetic powder core; Permeability; Revamped process;
D O I
10.11896/j.issn.1005-023X.2017.016.006
中图分类号
学科分类号
摘要
The magnetic property of FINEMET nanocrystalline magnetic powder core prepared by a revamped process was studied through comparative experiments, and the corresponding physical mechanism was observed. Scanning electron microscopy, transmission electron microscopy and X-ray diffraction were used to characterize the morphology, internal structure and lattice deformation of magnetic powders, B-H analyzer was used to characterize magnetic properties of magnetic powder core. The results showed that the revamped process could effectively reduce the loss of the magnetic powder core, and promote magnetic permeability and frequency range. The hysteresis loss and eddy current loss could be decreased by increasing milling time, and the optimum mil-ling time was 8 h. Our experiments found that the magnetic powders produced by the revamped process possess a relatively low lattice deformation, which means that the effective release of the remnant internal stress leads to the improve of magnetic powder core's performance. © 2017, Materials Review Magazine. All right reserved.
引用
收藏
页码:26 / 30
页数:4
相关论文
共 16 条
[1]  
Muller M., Novy A., Brunner M., Et al., Powder composite core of nanocrystalline soft magnetic FeSiBCuNb alloys, J Magn Magn Mater, 196-197, (1999)
[2]  
Iqbal Y., Daes H.A., Gibbs M.R., Et al., Nanocrystalline powder cores for high frequency applications, J Magn Magn Mater, 242-245, (2002)
[3]  
Kim G.H., Nof T.H., Magnetic properties of FeCuNbSiB nanocrystalline alloy powder cores using ball-milled powder, J Appl Phys, 93, 10, (2008)
[4]  
Wang X., Lu C., Guo F., Et al., New Fe-based amorphous compound powder cores with superior DC-bias properties and low loss characteristics, J Magn Magn Mater, 347, (2013)
[5]  
Tang Z., Zhu Z., Research on magnetic properties of Fe<sub>73.5</sub>Cu<sub>1</sub>Nb<sub>3</sub>Si<sub>13.5</sub>B<sub>9</sub> nanocrystalline dust core, J Funct Mater, 39, 8, (2008)
[6]  
Li C., Preparation and properties of Fe<sub>73.5</sub>Cu<sub>1</sub>Nb<sub>3</sub>Si<sub>13.5</sub>B<sub>9</sub> nanocrystalline powder core, Electron Compon Mater, 25, 5, (2006)
[7]  
Lu C., Lu Z., Guo F., Et al., Magnetic properties of amorphous Fe<sub>69</sub>Ni<sub>5</sub>Al<sub>4</sub>Sn<sub>2</sub>P<sub>10</sub>C<sub>2</sub>B<sub>4</sub>Si<sub>4</sub> powder prepared by water atomization and powder core using same, J Iron Steel Res, 19, (2007)
[8]  
Molodov D.A., Bhaumik S., Molodova X., Annealing behaviour of cold rolled aluminum alloy in high magnetic field, Scr Mater, 54, (2006)
[9]  
Shokrollahi H., Janghorban K., Effect of warm compaction on the magnetic and electrical properties of Fe-based soft magnetic composites, J Magn Magn Mater, 313, (2007)
[10]  
Matsumoto H., Urata A., Yamada Y., Et al., FePBNbCr soft magnetic glassy alloys with low loss characteristics for inductor cores, J Alloys Compd, 504S, (2010)