Wave propagation in cracked elastic media based on EMT using FEM

被引：0
作者：
Liu, Ning [1 ]
Li, Min [1 ]
Chen, Weimin [2 ]
机构：
[1] School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing
[2] Institute of Mechanics, Chinese Academy of Sciences, Beijing
来源：
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics | 2015年 / 41卷 / 09期
关键词：
Aspect ratio; Crack number density; Finite element method (FEM); Frequency; Hudson's theory;
D O I：
10.13700/j.bh.1001-5965.2014.0663
中图分类号：
学科分类号：
摘要：
Understanding mechanism of wave propagation in elastic media with cracks is the key scientific issue in exploration and extraction of shale and other unconventional oil and gas resources. Based on the advantages of the numerical simulation, the excitation and propagation of elastic wave in the cracked media were simulated by Nastran, a commercial solver for finite element analysis. Then the dependence of dynamic characteristics of propagation in that kind of media was further analyzed based on the microstructure (crack density, aspect ratio). Some conclusions were obtained as follows. Finite element method (FEM) would be effectively used to study the issue. Hudson's effective medium theory (EMT) could not be applied into materials with Poisson's ratio of nearly 0.5. Increasing crack density and aspect ratio would reduce the primary wave (P wave) velocity, with decaying the displacement amplitude of the P wave in time-domain. Crack density of the medium exposes greater effect on the anisotropy than the aspect ratio. ©, 2015, Beijing University of Aeronautics and Astronautics (BUAA). All right reserved.
引用
收藏
页码：1686 / 1692
页数：6
相关论文
共 20 条
  • [11] Aoki S., Kishimoto K., Kondo H., Et al., Elastodynamic analysis of crack by finite element method using singular element, International Journal of Fracture, 14, 1, pp. 59-68, (1978)
  • [12] Taylor L.M., Chen E., Kuszmaul J.S., Microcrack-induced damage accumulation in brittle rock under dynamic loading, Computer Methods in Applied Mechanics and Engineering, 55, 3, pp. 301-320, (1986)
  • [13] Ma G.W., Hao H., Zhou Y.X., Modeling of wave propagation induced by underground explosion, Computers and Geotechnics, 22, 3, pp. 283-303, (1998)
  • [14] Garboczi E.J., Berryman J.G., Elastic moduli of a material containing composite inclusions: Effective medium theory and finite element computations, Mechanics of Materials, 33, 8, pp. 455-470, (2001)
  • [15] Grechka V., Kachanov M., Effective elasticity of rocks with closely spaced and intersecting cracks, Geophysics, 71, 3, pp. D85-D91, (2006)
  • [16] Gaede O., Karpfinger F., Jocker J., Et al., Comparison between analytical and 3D finite element solutions for borehole stresses in anisotropic elastic rock, International Journal of Rock Mechanics and Mining Sciences, 51, pp. 53-63, (2012)
  • [17] Mavko G., Mukerji T., Dvorkin J., The Rock Physics Handbook: Tools for Seismic Analysis of Porous Media, pp. 21-76, (2009)
  • [18] Thomsen L., Weak elastic anisotropy, Geophysics, 51, 10, pp. 1954-1966, (1986)
  • [19] Wang X.C., Finite Element Method, pp. 468-520, (2003)
  • [20] Liu N., Wang Y., Li M., Et al., Nonlinear buckling analyses of a small-radius carbon nanotube, Journal of Applied Physics, 115, 15, (2014)
12