Study of the effect of SLM energy density on residual stress and microstructure of porous bone scaffolds in cubic structures

被引：2
作者：
Zhang S. [1 ]
Xu S. [1 ,2 ]
Zheng W. [1 ]
Han J. [1 ]
机构：
[1] School of Materials Science and Engineering, Shandong Jianzhu University, Jinan
[2] State Key Laboratory of Materials Processing and Die and Mould Technology, Huazhong University of Science and Technology, Wuhan
来源：
International Journal for Simulation and Multidisciplinary Design Optimization | 2022年 / 13卷
基金：
中国国家自然科学基金;
关键词：
Finite element analysis; Microstructure; Porous bone scaffolds; Residual stress; Selected laser melting;
D O I：
10.1051/smdo/2022016
中图分类号：
学科分类号：
摘要：
In order to investigate the effect of energy density in selective laser melting (SLM) forming on the properties of porous bone scaffolds made of 316L stainless steel, the mechanism of different construction energy densities on the residual stress and microstructure of cubic porous bone scaffolds was investigated by combining experiments and finite element analysis. The results showed that many defects were formed in the scaffolds when too high or too low energy densities were used to form the porous bone scaffolds. In terms of microstructure, inappropriate energy densities caused some grains to appear coarse and dispersed, which directly led to a reduction in the corrosion resistance of the scaffolds. Most importantly, the stress and temperature field changes in the melt pool during the SLM forming process were obtained through finite element calculations and analysis, and it was found that the residual stress in the scaffolds was proportional to the energy density. After a comprehensive study of the finite element analysis results and experimental characterization, the optimum energy density for constructing cubic porous bone scaffolds with ideal defects and residual stress in the porous bone scaffolds was obtained. © S. Zhang et al., Published by EDP Sciences, 2022.
引用
收藏
相关论文
共 38 条
  • [1] Naghmeh A., Stephen H., Love Robert M., Et al., Porous scaffolds for bone regeneration, J. Sci.: Adv. Mater. Dev., 5, pp. 1-9, (2020)
  • [2] Shanqing Xu X.W., Zhou S., Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review, Biomaterials, 83, pp. 127-141, (2016)
  • [3] Barui S., Chatterjee S., Mandal S., Et al., Microstructure and compression properties of 3D powder printed Ti-6Al-4V scaffolds with designed porosity: Experimental and computational analysis, Mater. Sci. Eng. C, 70, pp. 812-823, (2017)
  • [4] Wauthle R., Vrancken B., Beynaerts B., Et al., Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures, Addit. Manufactur., 5, pp. 77-84, (2015)
  • [5] Xu Z., Liu A.N., Wang X., Liu B., Guo M., Fatigue limit prediction model and fatigue crack growth mechanism for selective laser melting Ti6Al4V samples with inherent defects, Int. J. Fatigue, 143, (2021)
  • [6] Liu W., Chen C., Shuai S., Zhao R., Liu L., Wang X., Hu T., Xuan W., Li C., Yu J., Wang J., Ren Z., Study of pore defect and mechanical properties in selective laser melted Ti6Al4V alloy based on X-ray computed tomography, Mater. Sci. Eng. A, 797, (2020)
  • [7] Lxma B., Ddba B., Hjya B., Et al., Effects of embedded spherical pore on the tensile properties of a selective laser melted Ti6Al4V alloy, Mater. Sci. Eng. A, 815, (2021)
  • [8] Wei K., Li F., Huang G., Liu M., Deng J., He C., Zeng X., Multi-laser powder bed fusion of Ti6Al4V alloy: Defect, microstructure, and mechanical property of overlap region, Mater. Sci. Eng. A, 802, (2021)
  • [9] Tsopanos S., Mines R.A.W., McKown S., Shen Y., Cantwell W.J., Brooks W., Sutcliffe C.J., The influence of processing parameters on the mechanical properties of selectively laser melted stainless steel microlattice structures, J. Manufactur. Sci. Eng., 132, (2010)
  • [10] Olaf R., Bachmann Friedrich G., Claus E., Et al., Rapid manufacturing of lattice structures with selective lasermelting, Laser-Based Micropackag, 6017, (2006)
1234