Microstructure-property of laser cladding high carbon Fe-based alloy

被引：0
|
作者：
Zhou, Yefei [1 ]
Gao, Shiyou [1 ]
Wang, Jingjing [1 ]
机构：
[1] College of Mechanical Engineering, Yanshan University, Qinhuangdao
来源：
Zhongguo Jiguang/Chinese Journal of Lasers | 2013年 / 40卷 / 12期
关键词：
Fe-based alloy; Laser cladding; Laser technology; M[!sub]7[!/sub]C[!sub]3[!/sub] carbide; Microstructure; Property;
D O I：
10.3788/CJL201340.1203001
中图分类号：
学科分类号：
摘要：
High carbon Fe-based alloy with various C contents is deposited by laser cladding technology. Optical microscope (OM), X-ray diffraction (XRD), scanning electron microscope (SEM) with energy dispersive spectrometer (EDS), microhardness tester and electrochemical workstation are used to investigate the microstructure, phase, carbide morphology and composition distribution, microhardness and corrosion resistance of the cladding. The results show that the microstructure of high carbon Fe-based alloy is uniformed and compacted. With 2.5% C (mass fraction) in the cladding, the microstructure consists of primary γ-Fe with columnar dendrite morphology and inter-dendrite M7C3 carbide. With 4.5% C in the cladding, the microstructure consists of primary M7C3 carbide with equiaxed dendrite morphology and eutectic (M7C3+γ-Fe). With the content of C increasing, the average microhardness of the cladding increases from 913.96 HV to 1421.54 HV. Meanwhile, the corrosion resistance of the cladding is improved.
引用
收藏
相关论文
共 15 条
  • [1] Zikin A., Hussainova I., Katsich C., Et al., Advanced chromium carbide-based hardfacings, Surface and Coatings Technology, 206, 19-20, pp. 4270-4278, (2012)
  • [2] Veinthal R., Kulu P., Pirso J., Et al., Characterization and prediction of abrasive wear of powder composite materials, Wear, 267, 12, pp. 2216-2222, (2009)
  • [3] Coronado J.J., Effect of (Fe, Cr)<sub>7</sub>C<sub>3</sub> carbide orientation on abrasion wear resistance and fracture toughness, Wear, 270, 3-4, pp. 287-293, (2011)
  • [4] Zhou Y.F., Yang Y.L., Li D., Et al., Effect of titanium content on microstructure and wear resistance of Fe-Cr-C hardfacing layers, Welding Journal, 91, 8, pp. 229-235, (2012)
  • [5] Xu B., Dong S., Zhu S., Et al., Prospects and developing of remanufacture forming technology, Journal of Mechanical Engineering, 48, 15, pp. 96-105, (2012)
  • [6] Wang H., Zhang L., Li A., Et al., Rapid solidification laser processing and forming of advanced aeronautical metallic materials, Journal of Beijing University of Aeronautics and Astronautics, 30, 10, pp. 962-967, (2004)
  • [7] Wang Y., Li L., Lu Q., Et al., Laser cladding Fe-based amorphous coatings on stainless substrate, Chinese J Lasers, 38, 6, (2011)
  • [8] Pei Y., Ouyang J., Lei T., Developments of laser clad composite coatings, Journal of Harbin Institute of Technology, 1, pp. 73-79, (1994)
  • [9] Zhi X.H., Xing J.D., Fu H.G., Et al., Effect of niobium on the as-cast microstructure of hypereutectic high chromium cast iron, Materials Letters, 62, 6-7, pp. 857-860, (2008)
  • [10] Carpenter S.D., Carpenter D., X-ray diffraction study of M<sub>7</sub>C<sub>3</sub> carbide within a high chromium white iron, Materials Letters, 57, 28, pp. 4456-4459, (2003)
12