A method to determine the grinding wheel's topography based on acoustic emission

被引：5

作者：

Weingaertner, Walter Lindolfo ^{[1
]}

Boaron, Adriano ^{[1
]}

机构：

[1] Department of Mechanical Engineering, Laboratório de Mecânica de Precisão (LMP), Universidade Federal de Santa Catarina (UFSC), Trindade, CEP: 88040-970, Florianópolis

来源：

International Journal of Abrasive Technology | 2012年 / 5卷 / 01期

关键词：

Acoustic emission; AE; Dressing process; External cylindrical grinding process; Grinding wheel's topography; Monitoring systems;

D O I：

10.1504/IJAT.2012.046826

中图分类号：

学科分类号：

摘要：

A method for determining the topographic characteristics of a grinding wheel is developed based on acoustic emission (AE) technology. For implementing the procedure, an AE monitoring system was integrated in the CNC of a grinding machine in order to detect a precise reference position on the grinding wheel's periphery, allowing an AE online mapping procedure to characterise the topography of the grinding wheel. The AE mapping procedure is carried out by acquiring the AERMS signals originated from the minimal interferences between grinding wheel and an AE instrumented diamond tip. The interferences are in the elastic deformation range. The obtained AE map of the grinding wheel's topography is compared with the grinding wheel's imprint topography as well as to a previous developed model aiming at the results validation. The AE mapping procedure is sensitive to different grinding wheel's topographies caused by changes in the dressing parameters and the inherent grinding wheel's wear. Copyright © 2012 Inderscience Enterprises Ltd.

引用

页码：17 / 32

页数：15

共 20 条

[1]

Boaron A., Determinação Do Posicionamento Relativo Entre Rebolo e Peça Com O Auxílio da Emissão Acústica, (2009)

[2]

Gomes J.J.F., Identificação em Processo de Mecanismos de Desgaste de Rebolos, (2001)

[3]

Karpuschewski B., Sensoren Zur Prozessüberwachung Beim Spanen, (2001)

[4]

Klocke F., Manufacturing Process 2: Grinding, Honing, Lapping, (2009)

[5]

Klocke F., Duscha M., Kriworotow D., Development of An Evaluation Model for CBN Grinding Wheels, (2011)

[6]

Kluft W., Process Monitor GD 200, (1989)

[7]

Konig W., Fertigunsverfahren, (1989)

[8]

Konig W., AE in grinding and dressing: Accuracy and process reliability, 4th International Grinding Conference, (1990)

[9]

Lachance S., Warkentin A., Bauer R., Development of an automated system for measuring grinding wheel wear flats, Journal of Manufacturing Systems, 22, 2, pp. 130-135, (2003)

[10]

Linke S.B., Wirkmechanismen Beim Abrichten Keramisch Gebundener Schleifscheiben, (2007)

← 1 2 →