Influence of laser power variation on laser-induced changes of crystalline silicon

被引：0
作者：
Yang C. [1 ,2 ]
Mei X. [3 ]
Wang W. [3 ]
Tian Y. [1 ,2 ]
Zhang D. [1 ,2 ]
Cui L. [1 ,2 ]
机构：
[1] School of Mechanical Engineering, Tianjin University, Tianjin
[2] Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, Tianjin University, Tianjin
[3] School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an
来源：
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2016年 / 45卷 / 01期
关键词：
Chemical composition; Crystalline silicon; Laser pulse power variation; Microstructure; Picosecond laser;
D O I：
10.3788/IRLA201645.0106006
中图分类号：
学科分类号：
摘要：
In order to understand the influence of picosecond laser irradiation on crystalline silicon, laser-induced changes of crystalline silicon by picosecond laser ablation with different average laser powers were studied. Then X-ray photoelectron spectroscopy and transmission electron microscope were used to analyze the influence of average laser power variation on final chemical composition and microstructure of the ablated silicon, respectively. It is concluded that, with the increase of average laser power, the relative content of Si in ablation product keeps falling, by contrast, the relative content of SiO2 gradually rises. At the same time, the increase of average laser power intensifies the amorphization degree of microstructure of ablated silicon. Finally, it is deduced that the increased laser fluence resulted from average laser power increasing is the main reason for all of above experimental results, and also to enlarge and deepen the thermal and mechanical damages in ablated silicon. © 2016, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.
引用
收藏
页数：7
相关论文
共 26 条
  • [1] Huang Y., Application of laser i n the fabrication of microelectronic devices, Infrared and Laser Engineering, 20, 3, pp. 1-5, (1991)
  • [2] Zhu Q., Status, development trend and key technology of Micro mechanical processing technology, Precise Manufacturing & Automation, 2, pp. 9-11, (2002)
  • [3] He Y., Zhang L., Li T., Et al., Technology of silicon-based MEMS, Journal of Mechanical Strength, 23, 4, pp. 523-526, (2001)
  • [4] Wang X., Xu X., Thermoelastic wave in metal induced by ultrafast laser pulses, J Therm Stresses, 25, 5, pp. 457-473, (2002)
  • [5] Henyk M., Costache F., Reif J., Femtosecond laser ablation from sodium chloride and barium fluoride, Appl Surf Sci, 186, 1, pp. 381-384, (2002)
  • [6] Juhasz T., Loesel F.H., Kurtz R.M., Et al., Corneal refractive surgery with femtosecond lasers, IEEE J Sel Top Quant, 5, 4, pp. 902-910, (1999)
  • [7] Keller U., Recent developments in compact ultrafast lasers, Nature, 424, 6950, pp. 831-838, (2003)
  • [8] Cui C., Cui X., Shi G., Surface morphology of non-metallic solid materials after laser carving, Infrared and Laser Engineering, 43, 12, pp. 3932-3936, (2014)
  • [9] Bonse J., Brzezinka K.-W., Meixner A., Modifying single-crystalline silicon by femtosecond laser pulses: an analysis by micro Raman spectroscopy, scanning laser microscopy and atomic force microscopy, Appl Surf Sci, 221, 1, pp. 215-230, (2004)
  • [10] Borowiec A., Mackenzie M., Weatherly G., Et al., Transmission and scanning electron microscopy studies of single femtosecond-laser-pulse ablation of silicon, Appl Phys AMater, 76, 2, pp. 201-207, (2003)
123