Numerical simulation of double-sided explosive welding of stainless steel/ordinary carbon steel

被引：0

作者：

Miao G. ^{[1
,2
]}

Ai J. ^{[2
]}

Ma L. ^{[2
]}

Li X. ^{[2
]}

Ma H. ^{[3
]}

Shen Z. ^{[3
]}

机构：

[1] State Key Laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines, Anhui University of Science and Technology, Huainan

[2] Anhui University of Science and Technology, Huainan

[3] Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei

来源：

Hanjie Xuebao/Transactions of the China Welding Institution | 2020年 / 41卷 / 08期

关键词：

304; steel; Double-sided explosive welding; Numerical simulation; Q235;

D O I：

10.12073/j.hjxb.20200215001

中图分类号：

学科分类号：

摘要：

In order to improve the utilization rate of energy, two composite plates can be obtained at one time by using a double-sided explosive welding device. With the help of LS-DYNA software and smoothed particle hydrodynamics, SPH-FEM coupling algorithm was adopted. Three-dimensional numerical simulations were made for the double-sided explosive welding experiment of stainless steel/ordinary carbon steel by selecting 304 stainless steel with the thickness of 3 mm, Q235 steel with 16 mm and emulsion explosives. The explosive welding window was calculated and established. The vertical displacement, collision pressure and collision velocity were analyzed, and the simulation results were consisted with the experimental results. The simulation results show that the composite quality is better under the thickness of 7 mm, while the welding failure may be caused by the excessive collision energy under the thickness of 10 mm. The simulation results were in accordance with the experimental results. The Gurney formula was introduced to predict the experimental results. The calculation results show that the prediction results of the Gurney formula are in good agreement with the experimental results, indicating that the SPH-FEM coupling algorithm and Gurney formula are effective for double-sided explosive welding of stainless steel/ordinary carbon steel. Copyright © 2020 Transactions of the China Welding Institution. All rights reserved.

引用

页码：55 / 62

页数：7

共 25 条

[1]

Carl L R., Brass welds, made by detonation impulse[J], Metal Progress, 46, 1, pp. 102-103, (1944)

[2]

Miao Guanghong, Ma Honghao, Shen Zhaowu, Et al., Double sided explosive cladding of stainless steel and ordinary carbon steel, Explosion and Shock Waves, 35, 4, pp. 536-540, (2015)

[3]

Miao Guanghong, Ma Honghao, Shen Zhaowu, Et al., Explosives with structure of honeycomb and its application, Chinese Journal of Energetic Materials, 22, 5, (2014)

[4]

Shi Changgen, Wang Yu, Xu Hong, Numerical simulation and test of double vertical explosion welding and protective devices, Transactions of the China Welding Institution, 33, 3, pp. 109-112, (2012)

[5]

Shi Changgen, Yang Xuan, Hou Hongbao, Et al., Analysis and experiment of the upper limit rule of the distance between two plates in explosive welding, Transactions of the China Welding Institution, 39, 1, (2018)

[6]

Shi Changgen, Sun Zerui, Fang Zhongxing, Et al., Design and test of a protective structure for the double vertical explosive welding of large titanium/steel plate[J], China Welding, 28, 3, (2019)

[7]

Zhang Tingting, Wang Wenxian, Zhang Wei, Et al., Interfacial microstructure evolution and deformation mechanism in an explosively welded Al/Mg alloy plate, Journal of Materials Science, 54, 12, pp. 9155-9167, (2019)

[8]

Feng Jianrui, Dai Kaida, Zhou Qiang, Et al., Formation of bonding interface in explosive welding-a molecular dynamics approach, Journal of Physics, 31, 41, (2019)

[9]

Bataev I A, Tanaka S, Zhou Q, Et al., Towards better understanding of explosive welding by combination of numerical simulation and experimental study, Materials & Design, 169, (2019)

[10]

Zhang Guanren, Chen Danian, Detonation dynamics of condensed explosives, (1991)

← 1 2 3 →