Size optimization of a rod using frequency response functions of substructures

被引：1

作者：

Yoon H.G. ^{[1
]}

Lee J.W. ^{[2
]}

机构：

[1] Dept. of Mechanical Engineering, Ajou Univ.

来源：

Transactions of the Korean Society of Mechanical Engineers, A | 2017年 / 41卷 / 10期

关键词：

Equivalent vibration system; Frequency response function; Modal analysis; Rod; Size optimization; Substructure;

D O I：

10.3795/KSME-A.2017.41.10.905

中图分类号：

学科分类号：

摘要：

In this work, a method of size optimization is proposed to maximize the natural frequency of a rod that consists of a hidden shape in one part and an exposed shape in the other. The frequency response function of a rod composed of two parts is predicted by using the frequency response functions of each of the parts instead of the shapes of the parts. The mass and stiffness matrices of the rod are obtained by using the mass and stiffness matrices of the equivalent vibration systems, which are obtained by applying the experimental modal analysis method to the frequency response functions of the parts. Through several numerical examples, the frequency response function obtained by using the proposed method is compared with that of a rod to validate the prediction method based on equivalent vibration systems. A size optimization problem is formulated for maximizing the first natural frequency of a combined rod, which is replaced with an equivalent vibration system, and a rod structure is optimized by using an optimization algorithm. © 2017 The Korean Society of Mechanical Engineers.

引用

页码：905 / 913

页数：8

共 16 条

[1]

Hurty W.C., Vibrations of structural systems by component mode synthesis, J. Eng Mech. Div- ASCE, 86, 4, pp. 51-70, (1960)

[2]

Craig R.R., Bampton M.C., Coupling of substructures for dynamic analyses, AIAA J, 6, 7, pp. 1313-1319, (1968)

[3]

Oh J.E., Lee J.H., Lim D.K., A study on the identification and improvement of dynamic characteristics of large structure by component Mode Synthesis Method, Trans. Korean Soc. Noise Vib, 4, 3, pp. 327-335, (1994)

[4]

Kim B.S., Kim B.S., Yoo H.H., Analysis of vibration characteristics of a full vehicle model using substructure synthesis method, Trans. Korean Soc. Mech. Eng. A, 34, 5, pp. 519-525, (2010)

[5]

Choi W.H., Na Y.S., Park G.J., Structural optimization using equivalent static loads and substructure synthesis method, Trans. Korean Soc. Mech. Eng. A, 39, 8, pp. 823-830, (2015)

[6]

Tsai J.S., Chou Y.F., The identification of dynamic characteristics of a single bolt joint, J Sound Vib, 125, 3, pp. 487-502, (1988)

[7]

Yang T., Fan S.H., Lin C.S., Joint stiffness identification using frf measurements, Comput. Struct, 81, 28-29, pp. 2549-2556, (2003)

[8]

Klerk D.D., Rixen D.J., Voormeeren S.N., General framework for dynamic substructuring: History, review, and classification of techniques, AIAA J, 46, 5, pp. 1169-1181, (2008)

[9]

Craig R.R., Kurdila A.J., Fundamentals of Structural Dynamics, (2006)

[10]

Maia N.M.M., Silva J.M.M., Theoretical and Experimental Modal Analysis, (1997)

← 1 2 →