Proposal for measuring parameter lead of screw rotor with coordinate measuring machine

被引：0

作者：

Zhao, Qiancheng ^{[1
]}

Yang, Tianlong ^{[1
]}

Huang, Dongzhao ^{[1
]}

Yin, Xiyun ^{[2
]}

机构：

[1] Hunan Provincial Key Laboratory of Health Maintenance for Mechanical Equipment, Hunan University of Science and Technology, Taoyuan Road, Xiangtan 411201, China

[2] College of Electromechanical Engineering, Hunan University of Science and Technology, Taoyuan Road, Xiangtan 411201, China

来源：

ICIC Express Letters | 2013年 / 7卷 / 11期

基金：

中国国家自然科学基金;

关键词：

Probes; -; Screws;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Surface of a screw rotor is a typical helical surface with complicated 3-D shape, which causes many difficulties in obtaining parameter lead by measuring spiral line with coordinate measuring machine equipped with touch trigger probe. Aiming at this issue, a new method is proposed to keep procedure of lead measurement from spiral scan, in this method, a cluster of transverse section profiles in different axial positions of a single tooth are scanned, and probe offsets of the measured data are compensated by a new probe compensation method, simulation re-measurement, after that, lead is calculated out by axial intercept and relative rotary match between profiles defined as reference and target. Simulation and actual measurement are carried out respectively; results prove that this method is advisable. © 2013 ISSN 1881-803X.

引用

页码：3021 / 3026

共 50 条

[1] A PROPOSAL FOR IMPROVING THE MEASURING ACCURACIES OF A 3-COORDINATE MEASURING MACHINE
MIZUHARA, K
MIYAJIMA, I
ASANO, Y
TATSUE, Y
FUJIKAWA, A
JOURNAL OF MECHANICAL ENGINEERING LABORATORY, 1983, 37 (03): : 95 - 106
[2] Screw theory-based mathematical model and parameter calibration for articulated arm coordinate measuring machine
Huang, Kui
Mo, Jianhua
Fu, Zemin
Shi, Yusheng
Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), 2010, 38 (04): : 94 - 97
[3] COORDINATE MEASURING MACHINE
不详
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 1995, 67 (02): : 27 - 27
[4] Parameter Identification of Double Parallel Joints Coordinate Measuring Machine
Ye Teng
Li Junrui
Cheng Wentao
Yu Liandong
Fei Yetai
6TH INTERNATIONAL SYMPOSIUM ON PRECISION ENGINEERING MEASUREMENTS AND INSTRUMENTATION, 2010, 7544
[5] Parameter calibration method of articulated arm coordinate measuring machine
Wang X.
Wang H.
Lu Y.
Zhang P.
2016, Chinese Society of Agricultural Machinery (47): : 408 - 412
[6] Determining the Optimal Parameter of Coordinate Measuring Machine with Design of Experiment
Sangnuan, Kusalin
Laosiritaworn, Wimalin S.
2016 3RD INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND APPLICATIONS (ICIEA 2016), 2016, 68
[7] MEASURING UP - COORDINATE MEASURING MACHINE SURVEY
NAGLER, B
TOOLING & PRODUCTION, 1983, 49 (02): : 40 - 47
[8] ON THE INDUSTRIALIZATION OF SCREW LEAD MEASURING MACHINE WITH LASER INTERFEROMETER.
Yamamoto, Akira
Yoshimoto, Isamu
Maruyama, Kazuo
Tanimura, Yoshihisa
Ohta, Kazuhide
1600,
[9] Parameter Calibration Method Based on Screw Theory for Articulated Coordinate Measuring Arm
Huang, Kui
Liu, Rongguang
Wu, JianSheng
Lao, Xinrong
Mo, Jianhua
MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 4049 - +
[10] NEW COORDINATE MEASURING MACHINE
不详
METALLURGIA, 1990, 57 (04): : 190 - 190

← 1 2 3 4 5 →