Desulfurization of SiMn alloy with high sulfur

被引：0

作者：

Zhu, Zi-Zong ^{[1
]}

Fan, Jin-Huan ^{[1
]}

Li, Qin ^{[1
]}

Xie, Ze-Wei ^{[1
]}

机构：

[1] College of Materials Science and Engineering, Chongqing University, Chongqing

来源：

Dongbei Daxue Xuebao/Journal of Northeastern University | 2014年 / 35卷 / 10期

关键词：

CaO-BaO-MgO-SiO[!sub]2[!/sub]-CaF[!sub]2[!/sub] slag system; Desulfurization; SiMn alloy with high sulfur; Sulfur capacity; XRD analysis;

D O I：

10.3969/j.issn.1005-3026.2014.10.023

中图分类号：

学科分类号：

摘要：

The effects of MgO, CaO, BaO in CaO-BaO-MgO-SiO2-CaF2 slag on the desulfurization of SiMn alloy with high sulfur were studied in a silicon molybdenum furnace, and with XRD and chemical analyses. The results showed that the desulfurization ability rises first and then falls with increasing m (BaO) ∶ m (CaO) ratio. When the mass fractions of MgO and CaF2 are 8% and 10% respectively, and m (BaO):m (CaO) is 0.914 3, the desulfurization efficiency reaches to 94.4%. When the mass fractions of MgO and CaF2 are 12% and 14% respectively, and m (BaO):m (CaO) is 0.787 9, the desulfurization efficiency reaches to 95.4%. Meanwhile, when the mass fractions of CaO and BaO are 35% and 32% separately, the desulfurization ability rises first and then falls with increasing the mass fraction of MgO, and the desulfurization effect is the best when the mass fraction of MgO is 8%.

引用

页码：1468 / 1472

页数：4

共 18 条

[1]

Tan Z.-Z., Mei G.-G., Li W.-J., Et al., Manganese Metallurgy, (2004)

[2]

Long Y.-C., Control of sulphur content in roasted manganese ores of Guizhou Tuanxi, China's Manganese Industry, 15, 2, pp. 28-31, (1997)

[3]

Peng Z.-J., Chen S.-J., Peng F., Investigation on desulphurization of high sulphur manganese ore, China's Manganese Industry, 21, 4, pp. 29-32, (2003)

[4]

Liu X.-W., Preliminary test for reducing sulphur content of silicomanganese alloy, Ferro-Alloys, 3, pp. 9-10, (1990)

[5]

Shu L., Dai W., Sulphur content's controlling of Mn-Si alloy, Ferro-Alloys, 4, pp. 7-11, (1994)

[6]

Kimihisa I., Nobuo S., Equilibrium phosphorus distribution between CaO-containing slag and carbon-saturated iron at hot metal pretreatment temperature, Transactions of the Iron and Steel Institute of Japan, 69, 15, pp. 1747-1754, (1983)

[7]

Shinme K., Matsuo T., Dephosphorization and desulphurization of hot metal by CaO-based flux containing MnO<sub>2</sub>, Transactions of the Iron and Steel Institute of Japan, 69, 15, pp. 1787-1794, (1983)

[8]

Li S.-Q., Li S.-Q., Zhu R., Et al., High sulphur capacity slag series containing BaO for ultra-low sulphur steel refining, Special Steel, 25, 2, pp. 23-24, (2002)

[9]

Huang X.-G., Ferrous Metallurgical Principle, (2010)

[10]

Fincham C.J.B., Richardson F.D., The behaviour of sulphur in silicate and aluminate melts, Proceedings of the Royal Society of London Series A: Mathematical and Physical Sciences, 223, 1152, pp. 40-62, (1954)

← 1 2 →