A review on the mechanical properties of areca fiber reinforced composites

被引：0
作者：
Ashok R.B. [1 ]
Srinivasa C.V. [2 ]
Basavaraju B. [3 ]
机构：
[1] P.E.S. Institute of Technology and Management, Department of Mechanical Engineering, Karnataka, Shivamogga
[2] GM Institute of Technology, Department of Mechanical Engineering, Karnataka, Davanagere
[3] Alva's Institute of Engineering and Technology, Department of Chemistry, Karnataka, Mijar
来源：
Science and Technology of Materials | 2018年 / 30卷
关键词：
Areca nut fiber; Chemical treatment; Fiber reinforced composites; Mechanical properties; Natural composites;
D O I：
10.1016/j.stmat.2018.05.004
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Naturally available filaments have recently become attractive to researchers, engineers, and scientists because of suitability as an alternative reinforcement for fiber reinforced polymer composites. Low cost, fairly good mechanical properties, non-abrasive and bio-degradability attributes, abused as a swap for the regular fiber. The tractable properties of normal fiber reinforced composites are mainly influenced by the interfacial adhesion between the matrix and the fibers. In this article survey on biosoftening, adhesion, the effect of fiber length, the effect of chemical treatments of long areca fibers, Influence of mercerization on the tensile strength of long & short areca fibers, areca husk have been discussed. © 2018 Sociedade Portuguesa de Materiais (SPM)
引用
收藏
页码：120 / 130
页数：10
相关论文
共 40 条
[1]  
Mohan Kumar G.C., Proceedings of the World Congress on Engineering, vol. II, (2008)
[2]  
Rajan A., Et al., Bioactive Polymer Engineering Section, (2005)
[3]  
Hazarika S.B., Et al., Int. J. Sci. Ind. Res., 74, pp. 589-594, (2015)
[4]  
Srinivasa C.V., Et al., Adv. Polym. Technol., 31, pp. 319-330, (2012)
[5]  
Padmaraj N.H., Et al., Proceedings of the IV National Conference on Trends in Mechanical Engineering, TIME'10 (30th December 2010), pp. 30-33, (2010)
[6]  
Ramachandra Reddy G., Et al., Int. J. Mater. Biomater. Appl., 1, pp. 6-13, (2011)
[7]  
Jayamania E., Et al., Sci-Dire, Procedia Eng., 97, pp. 545-554, (2014)
[8]  
Girisha C., Et al., Int. J. Eng. Res. Appl. (IJERA), 2, pp. 615-619, (2012)
[9]  
Nirmal U., Et al., Text. Res. J., 82, (2012)
[10]  
Yousif B.F., Nirmal U., Proc. IMechE Part C: J. Mech. Eng. Sci., 224, pp. 1805-1814, (2010)
1234