Study on the optimization of dressing process of diamond wheel for precision bearing grinding

被引：0

作者：

Chi Y.-L. ^{[1
]}

Gu J.-J. ^{[1
]}

机构：

[1] University of Shanghai for Science and Technology, Shanghai

来源：

Surface Technology | 2021年 / 50卷 / 03期

关键词：

Diamond wheel dressing; Dressing speed ratio; Frequency response function; Interference angle; Precision bearing grinding; Process optimization;

D O I：

10.16490/j.cnki.issn.1001-3660.2021.03.040

中图分类号：

学科分类号：

摘要：

Through the study on the optimization of the surface dressing process of the bearing ring, high-quality and efficient grinding of the bearing ring surface is achieved. Based on the diamond wheel dressing principle and mechanical principle, this paper establishes a simplified model of the dressing process system to obtain the natural frequency of the system and determine the optimal speed of the spindle according to the frequency response function curve; builds the trajectory equation of the grinding wheel and the wheel to obtain the radius of curvature, and the dressing speed ratio that makes the surface roughness of the grinding wheel lower according to the radius of curvature; then introduces a new physical quantity interference angle, determines an optimal interference angle based on experience, and substitutes the dressing speed ratio to obtain the final feed rate of the wheel; finally, optimizes the entire dressing process by the size of the grinding force obtained indirectly, and reselects the spindle speed if the grinding force is too large. According to the optimization results obtained by this method, when the grinding wheel speed is 23 994 r/min, the wheel speed is 5473 r/min, the dressing feed speed is 1.77 mm/min, and the grinding force is 37.2 N, the bearing ring surface will be in higher quality. Compared with the groove shape of the bearing ring before and after optimization, it is changed from the unqualified before the optimization to the qualified after the optimization, so there is a significant improvement. The dressing parameters are determined by multiple methods, and finally optimized by grinding force. And according to the problems presented on the surface of the processed products, the corresponding parameters can be found, and then optimized individually, which provides a scientific and effective method for the enterprise to optimize the surface quality of the bearing ring. © 2021, Chongqing Wujiu Periodicals Press. All rights reserved.

引用

页码：366 / 375

页数：9

共 25 条

[1] Xiao J.-R., Liu X.-C., Liang Z.-W., Et al., Influence of strengthen grinding micro-nano machining parameters on surface hardness of bearing ring raceway[J], Journal of Netshape Forming Engineering, 12, 4, pp. 112-117, (2020)
[2] Chang Z., Jia Q., Zha J., Optimization of grinding efficiency considering surface integrity of bearing raceway[J], Journal of Harbin Bearing, 39, 2, pp. 3-7, (2018)
[3] Hou Z., Zeng J., Roughness identification of bearing ring groove grinding based on BP neural network[J], Machine Design & Research, 35, 3, pp. 119-122, (2019)
[4] Wang W.-L., Zhang H.-J., A new method for grinding large circular raceway of bearing inner rings[J], Bearing, 2015, 12, pp. 26-27
[5] Wang S.-B., Effect of the diamond pen position on the raceway of bearing ring[J], Bearing, 1, pp. 17-19, (2008)
[6] Xu J., Sun F.-H., Application of CBN grinding wheel on the inner grinding of bearing rings[J], Mechanical Engineer, 11, pp. 44-45, (2006)
[7] Chen Z.-J., Zhang X., Dressing of grinding wheel during grinding of outer raceway of thrust angular contact ball bearings[J], Bearing, 11, pp. 21-24, (2019)
[8] Li H.-L., CNC Bearing grinding wheel dressing three concavity[J], Journal of Henan Science and Technology, 2016, 9, pp. 61-63
[9] Torrance A.A., Badger J.A., The relation between the traverse dressing of vitrified grinding wheels and their performance[J], International Journal of Machine Tools and Manufacture, 40, 12, pp. 1787-1811, (2000)
[10] Yang M.-X., Cui Z.-M., He Q.-S., Et al., Application of diamond roller dressing technology in grinding of bearing raceway[J], Bearing, 3, pp. 15-19, (2019)

← 1 2 3 →