Noise characteristics of an aircraft's main landing gear structure

被引:0
|
作者
Long, Shuang-Li [1 ]
Nie, Hong [1 ]
Xue, Cai-Jun [1 ]
Xu, Xin [1 ]
机构
[1] State Key Laboratory of Strength and Vibration of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
来源
关键词
Landing gear (aircraft) - Acoustic fields - Struts - Aerodynamics - Wind - Aeroacoustics - Noise pollution;
D O I
暂无
中图分类号
学科分类号
摘要
Aeroacoustic wind tunnel tests and simulation analysis were performed for aerodynamic noise characteris-tics of an aircraft's main landing gear component. The sound field radiated from the structure was measured in an aeroacoustic wind tunnel at different wind speeds. The noise spectra were evaluated with micro-phones. Detached eddy simulation was used to build a flow field around the structure. The sound source strength and location were calculated with the vortex sound theory. The acoustic field was calculated via FW-H equation. The frequency spectra, the directivity characteristics and its mechanism of the noise were subsequently studied. The results indicated that the spectra in lower and middle frequency ranges from the simulation agree with those from the tests; the noise radiated around the structure is a broadband noise; the spectra and dominant frequencies increase with increase in wind speed; in the spectra, there are two energy peaks corresponding to the inter-action noises between shock absorber and strut as well as shock absorber and bogie, respectively; the pressure fluctuation forming the noise sources is on the surface of the lower part of the shock absorber; the shock absorber and bogie are the main contributors while the strut is the least contributor to the total noise; noise radiation has unsymmetric directivities.
引用
收藏
页码:134 / 139
相关论文
共 50 条
  • [21] Simulation of aircraft landing gear
    Kapadoukas, G.
    Self, A.
    Systems Analysis Modelling Simulation, 21 (04):
  • [22] Failure Investigation: in Flight Loss of a Main Landing Gear Door of a Transport Aircraft
    Zucca, G.
    di Francesco, V.
    Bernabei, M.
    De Paolis, F.
    XXIV ITALIAN GROUP OF FRACTURE CONFERENCE, 2017, 2017, 3 : 553 - 561
  • [23] Mechanism analysis of a main landing gear of transporting aircraft: A design learning perspective
    Kadarno, P.
    Barrinaya, M. A.
    Manurung, A. O.
    Riyandwita, B. W.
    Hastuty, S.
    Rahmawan, Y.
    Pradanawati, S. A.
    Widiyati, K.
    Putra, I. S.
    Purbolaksono, J.
    ENGINEERING FAILURE ANALYSIS, 2021, 119 (119)
  • [24] Failure analysis on abnormal cracking of the main landing gear door of a civil aircraft
    Jiang, Tong-Hao
    Yang, Zhen -Guo
    ENGINEERING FAILURE ANALYSIS, 2024, 160
  • [25] Manufacturing and Validation of a Novel Composite Component for Aircraft Main Landing Gear Bay
    Viscardi, M.
    Arena, M.
    Cerreta, P.
    Iaccarino, P.
    Imparato, S. Inserra
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (06) : 3292 - 3300
  • [26] Manufacturing and Validation of a Novel Composite Component for Aircraft Main Landing Gear Bay
    M. Viscardi
    M. Arena
    P. Cerreta
    P. Iaccarino
    S. Inserra Imparato
    Journal of Materials Engineering and Performance, 2019, 28 : 3292 - 3300
  • [27] Fault Analysis of Abnormal Opening of the Main Landing Gear Door of Civil Aircraft
    Liu, Wenwen
    2020 6TH INTERNATIONAL CONFERENCE ON ENERGY MATERIALS AND ENVIRONMENT ENGINEERING, 2020, 508
  • [28] Analysis of the Arresting Dynamic Loads of Aircraft's Landing Gear
    Jia, Zhonghu
    Han, Wei
    Zheng, Xiaohong
    Tao, Yang
    VIBRATION, STRUCTURAL ENGINEERING AND MEASUREMENT I, PTS 1-3, 2012, 105-107 : 470 - +
  • [29] Lighter landing gear for future aircraft
    Lindley, JW
    NOUVELLE REVUE AERONAUTIQUE ASTRONAUTIQUE, 1998, (02): : 86 - 90
  • [30] On transverse vibration of aircraft landing gear
    Plakhtienko N.P.
    Shifrin B.M.
    Strength of Materials, 2002, 34 (6) : 584 - 591