An isentropic equation of state of detonation product based on a Hugoniot relationship of detonation product

被引:0
作者
Liu Y. [1 ]
Hu X. [1 ]
机构
[1] Institute of Applied Physics and Computational Mathematics, Beijing
来源
Baozha Yu Chongji/Explosion and Shock Waves | 2018年 / 38卷 / 01期
关键词
Detonation product; Hugoniot relationship; Isentropic EOS; Riemann integral;
D O I
10.11883/bzycj-2016-0132
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
First, an empirical fit of the detonation product Hugoniot relationship through the C-J (Chapman Jouget) point was obtained by fitting 136 sets of the pressure-particle velocity experimental data of different explosives. Then, by Riemann integrating this relationship, an isentropic EOS (equation of state) of the detonation product, which describes the relationship between the pressure and the relative volume of the detonation product, was proposed. Unlike the traditional and empirical isentropic EOS, the new EOS requires no calibration by specific experiment because the parameters in it are just the initial specific volume and the C-J status variables of the explosive, thereby saving the cost of the calibration experiment and computing. For verification, the isentropic expansion curves of the detonation product of the Comp-B, HMX, PETN, ANFO, TNT and LX-14 explosives were plotted in the p-V space by adopting this new isentropic EOS and found to be in good agreement with the corresponding curves plotted by adopting the JWL isentropic EOS. © 2017, Editorial Board of EXPLOSION AND SHOCK WAVES. All right reserved.
引用
收藏
页码:60 / 65
页数:5
相关论文
共 8 条
[1]  
Suceska M., Ang H.G., Chan S., Et al., Study of the effect of covolumes in BKW equation of state on detonation properties of CHNO explosives, Propellants, Explosives, Pyrotechnics, 38, 1, pp. 103-112, (2013)
[2]  
Hobbs M.L., Brundage A., Yarrington C., JCZS2i: An improved JCZ database for EOS calculations at high temperatures and pressures, (2014)
[3]  
Braithwaite M., Sharpe G.J., Reduced, chemistry implicit, equations of state for explosion and detonation products, Proceedings of 15th International Detonation Symposium, pp. 869-877, (2014)
[4]  
Sun C., Zhao F., Wen S., Et al., One dimensional isentropic flow of detonation products with general equation of state, Explosion and Shock Waves, 23, 6, pp. 481-487, (2003)
[5]  
Wang H., Gao J., Luo Y., Et al., Metal accelerating ability and JWL EOS of DNTF/HMX explosive, Ordnance Industry Automation, 7, pp. 64-66, (2014)
[6]  
Cooper P.W., Shock behavior of explosives about the C-J (Chapman-Juget) point, Proceedings of 9th International Symposium on Detonation, pp. 379-387, (1989)
[7]  
Lanterman D.D., An improved empirical fit of the detonation product isentrope near the CJ point, Proceedings of 15th International Detonation Symposium, pp. 466-470, (2014)
[8]  
Hornberg H., Determination of fume state parameters from expansion measurements of metal tubes, Propellants, Explosives, Pyrotechnics, 11, 1, pp. 23-31, (1986)