Simultaneous optimisation of conflicting responses for CNC turned parts using desirability function

被引：3

作者：

Aggarwal, Aman ^{[1
]}

Singh, Hari ^{[2
]}

Kumar, Pradeep ^{[3
]}

Singh, Manmohan ^{[4
]}

机构：

[1] Mechanical and Automation Engineering Department, Maharaja Agrasen Institute of Technology

[2] Mechanical Engineering Department, National Institute of Technology

[3] Department of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee

[4] Solid State Physics Lab, DRDO, Delhi

来源：

International Journal of Manufacturing Technology and Management | 2009年 / 18卷 / 03期

关键词：

AISI P-20 tool steel; CNC turning; Face centred central composite design; Multi response optimisation desirability function;

D O I：

10.1504/IJMTM.2009.026392

中图分类号：

学科分类号：

摘要：

This paper optimises multiple characteristics (tool life, cutting force, surface roughness and power consumption) in CNC turning of AISI P-20 tool steel using desirability function. Four controllable factors of the turning process viz. cutting speed, feed, depth of cut and nose radius, were studied. Face centred central composite design was used for experimentation. Response surface methodology was used for modelling the responses. Desirability function was used for single response and multiple response optimisation. The functions are plotted giving equal weightage to all the four responses. © 2009 Inderscience Enterprises Ltd.

引用

页码：319 / 332

页数：13

共 14 条

[1] Antony J., Multi-response optimisation in industrial experiments using Taguchi's quality loss function and principal components analysis, Quality and Reliability Engineering International, 16, pp. 3-8, (2000)
[2] Derringer G., Suich R., Simultaneous optimisation of several response variables, Journal of Quality Technology, 12, 4, pp. 214-219, (1980)
[3] Steel Machining Catalog 9008, (1999)
[4] Logothetis N., Haigh A., Characterising and optimising multi-response process by the Taguchi method, Quality and Reliability Engineering International, 4, pp. 159-169, (1988)
[5] Meng T.K., Butler C., Solving multiple response optimisation problems using adaptive neural networks, International Journal of Advanced Manufacturing Technology, 13, pp. 666-675, (1997)
[6] Padre S.M., Quality Engineering using Robust Design, (1989)
[7] Roubens M., Teghem J., Comparison of methodologies for fuzzy and stochastic multi-objective programming, Fuzzy Sets and System, 42, pp. 119-132, (1991)
[8] Roy R.K., A Primer on the Taguchi Method, (1990)
[9] Shiau G.H., A study of the sintering properties of iron ores using the Taguchi's parameter design, Journal of the Chinese Statistical Association, 28, pp. 253-275, (1990)
[10] Su C.T., Tong L.I., Multiple-response robust design by principal component analysis, Total Quality Management, 8, pp. 409-416, (1997)

← 1 2 →