The reliability analysis of the velocity ratio of coal cutting to support moving in fully mechanized top-coal caving face

被引：0
|
作者：
机构：
[1] Luo, S.-M.
[2] Miao, X.-X.
来源：
Luo, S.-M. | 2001年 / Xiangtan Mining Institute卷 / 16期
关键词：
Cutting - Reliability - Strength of materials - Stress analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
From the angle of reliability, the system of coal cutting and support moving of high productivity and efficiency Work face is analyzed in detail by using the interference theory of strength and stress distribution. The coupling equation and calculation formulas of the velocity ratio of coal cutting to support moving are established. The characteristic curve of the velocity ratio consists of three different areas, so the ratio of different work face should be selected according to different demand of reliability. The velocity ratio of coal cutting to support moving can be selected from 1.3 to 1.5 in high productivity and efficiency work face, or from 1.5 to 1.8 in super-length fully mechanized top-coal caving face. 2figs., 2tabs., 6refs.
引用
收藏
相关论文
共 50 条
  • [41] Formation mechanism of overburden bed separation in fully mechanized top-coal caving
    Zhang, Xin
    Qiao, Wei
    Lei, Li-Jian
    Zeng, Fan-Sheng
    Zhang, Hui
    Wang, Yang-Zhou
    Meitan Xuebao/Journal of the China Coal Society, 2016, 41 : 342 - 349
  • [42] Study on reasonable mining and caving ratio in fully-mechanized top-coal caving mining of coal seam with large thickness variation coefficient
    Zhang M.
    Li F.
    Yang L.
    Meitan Kexue Jishu/Coal Science and Technology (Peking), 2022, 50 (08): : 8 - 15
  • [43] SAFETY PROBLEMS IN FULLY-MECHANIZED TOP-COAL CAVING LONGWALL FACES
    吴健
    郭文章
    Journal of China University of Mining & Technology, 1994, (02) : 20 - 25
  • [44] Experimental study ontop-coal breaking and moving rulesduring fully mechanized top-coal caving mining in extremely thick coal seam
    Lyu H.
    Wang Z.
    Tang Y.
    Zhang L.
    Liu F.
    Zhang Y.
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2019, 38 (03): : 476 - 486
  • [45] Vibration Signal Time-domain Characteristic Extraction for Coal and Rock Recognition at the Fully Mechanized Top-coal Caving Face
    Zhu, Shigang
    Xue, Guanghui
    Zhao, Xinying
    Liu, Ermeng
    Wu, Miao
    MECHATRONICS ENGINEERING, COMPUTING AND INFORMATION TECHNOLOGY, 2014, 556-562 : 2862 - 2865
  • [46] Analysis of the danger zone liable to spontaneous ignition around coal roadway at fully mechanized long-wall top-coal caving face
    邓军
    徐通模
    徐精彩
    JournalofCoalScience&Engineering(China), 2002, (02) : 55 - 59
  • [47] Effect of Face Length in Initial Mining Stage of Fully Mechanized Top-Coal Caving Face with Large Mining Height
    Jianhang Wang
    Yao Lu
    Changxiang Wang
    Guangwei Xu
    Chengran Zhang
    Geotechnical and Geological Engineering, 2022, 40 : 711 - 722
  • [48] Effect of Face Length in Initial Mining Stage of Fully Mechanized Top-Coal Caving Face with Large Mining Height
    Wang, Jianhang
    Lu, Yao
    Wang, Changxiang
    Xu, Guangwei
    Zhang, Chengran
    GEOTECHNICAL AND GEOLOGICAL ENGINEERING, 2022, 40 (02) : 711 - 722
  • [49] Research on support bearing and top coal stability of fully mechanized caving face in deep mine
    Liu, CY
    Yang, PJ
    Wan, ZJ
    Wu, FF
    Mining Science and Technology, 2004, : 73 - 76
  • [50] Mining technology and combined equipment for fully mechanized top-coal caving face with annual output 6 Mt
    Lai, CL
    Mining Science and Technology, 2004, : 803 - 807
12345