Microstructures and Mechanical Properties of Welded Joints Made of 603 High Strength Steel and High Nitrogen Austenitic Stainless Steel

被引：0
|
作者：
Yang D. [1 ]
Zhang J. [1 ]
Fan J. [1 ,2 ]
Zhou Z. [1 ]
Wang K. [1 ]
机构：
[1] The Key Laboratory of Controlled Arc Intelligent Additive Technology Ministry of Industry and Information Technology, Nanjing University of Science and Technology, Jiangsu, Nanjing
[2] Kunshan Huaheng Welding Co., Ltd., Jiangsu, Kunshan
来源：
Binggong Xuebao/Acta Armamentarii | 2022年 / 43卷 / 08期
关键词：
603 martensitic high strength steel; ER307Mo wire; high nitrogen austenitic stainless steel; mechanical properties; microstructure;
D O I：
10.12382/bgxb.2021.0490
中图分类号：
学科分类号：
摘要：
Due to superior mechanical properties, high nitrogen austenitic stainless steel and 603 martensitic high strength steel are ideal materials for armor protection. According to the principle of “low strength matching”, ER307Mo austenitic stainless steel wire is selected for welding 30mm thick high nitrogen austenitic stainless steel and 603 martensitic high strength steel by pulse MIG butt welding. The microstructures and mechanical properties of the welded joints are analyzed. The results show that the welded joints with good surface appearance and no internal cracks and fusion defects are obtained. The microstructure is primarily austenite and ferrite dendrite surrounded by austenite matrix. The microstructure near the fusion line of high nitrogen austenite stainless steel is mainly austenite, and the microstructure near the fusion line of 603 steel is mainly strip martensite, bainite and tempered martensite. The joint’s fracture is mainly ductile fracture, with a small percentage of cleavage fracture. EDS point scanning results show that the second phase particles at the center of the dimple are Fe rich carbides. The average tensile strength of the welded joints is 722 MPa and the average elongation after fracture is 20. 2% . The dynamic yield strength of the welding metal is 913 MPa, the maximum engineering stress is 2 045 MPa, and the impact resistance exceeds that of the 603 steel base metal. © 2022 China Ordnance Society. All rights reserved.
引用
收藏
页码：1990 / 1997
页数：7
相关论文
共 22 条
  • [1] BAI D, LIU F D, ZHONG H, Et al., Corrosion behavior and passivation protection mechanism on different zone of high-nitrogen steel weld, Materials Letters, 300, (2021)
  • [2] PENG Y, SONG L, ZHAO L, Et al., Research status of weldability of advanced steel, Acta Metallurgica Sinica, 56, 4, pp. 601-618, (2020)
  • [3] MOHMMED R, REDDY G M, RAO K S., Welding of nickel free high nitrogen stainless steel: microstructure and mechanical properties, Defence Technology, 13, 2, pp. 59-71, (2017)
  • [4] ZHAO L, TIAN Z L, PENG Y., Control of nitrogen content and porosity in gas tungsten arc welding of high nitrogen steel [ J], Science and Technology of Welding and Joining, 14, 1, pp. 87-92, (2009)
  • [5] ZHANG F, LI G Q, ZHU C Y., Dissolution and release of nitrogen during preparing and welding of high nitrogen steel, Journal of Materials and Metallurgy, 5, 1, pp. 14-19, (2006)
  • [6] LI X X, ZHANG H, LIU F D, Et al., Analysis of microstructure and properties of welded joint of high nitrogen steel by hybrid welding, Laser Technology, 42, 3, pp. 341-345, (2018)
  • [7] MOHAMMED R, RAO K S, REDDY G M., Effect of microstructure on stress corrosion cracking behaviour of high nitrogen stainless steel gas tungsten arc welds, IOP Conference Series: Materials Science and Engineering, 330, 1, pp. 12-15, (2018)
  • [8] FRECHARD S, REDIAIEMIA A, LACH E, Et al., Mechanical behaviour of nitrogen-alloyed austenitic stainless steel hardened by warm rolling [ J ], Materials Science & Engineering A, 415, 1, pp. 219-224, (2006)
  • [9] TENG B, LI X Y, LEI Z, Et al., Sensitivity analysis of cold Crack in laser-arc composite heat source welding of low alloy high strength steel, Acta Armamentarii, 31, 11, pp. 61-64, (2010)
  • [10] LUO Y., Review on welding technology of high hardness armor steels for combat vehicles, Heavy Castings and Forgings, 195, 3, pp. 8-11, (2020)
123