Vibration and noise of an axial flow fan

被引：0

作者：

Kalmár-Nagy, Tamás ^{[1
]}

Bak, Bendegúz Dezso ^{[1
]}

Benedek, Tamás ^{[1
]}

Vad, János ^{[1
]}

机构：

[1] Department of Fluid Mechanics, Faculty of Mechanical Engineering, Budapest University of Techology and Economics, Bertalan L. Street 4-6, Budapest

来源：

Periodica Polytechnica Mechanical Engineering | 2015年 / 59卷 / 03期

关键词：

Axial flow fan; Noise; Phased array microphone (PAM); ROSI algorithm; Vibration;

D O I：

10.3311/PPme.7948

中图分类号：

学科分类号：

摘要：

We describe a mechanical/acoustic study of a short-ducted axial flow fan. The purpose is to compare mechanical noise to that caused by flow phenomena. The eigenfrequencies of the fan are identified through measurement and finite element computations. The fan acoustics is evaluated by beamforming studies using the Phased Array Microphone technique. The acoustic measurement data is processed by the Rotating Source Identifier method. The modal analysis of the fan model and the acoustic experiments reveal that the fan noise is dominated by mechanical noise in the few hundred Hz range and rotating sources of broadband noise above. © 2015, Technical University of Budapest. All rights reserved.

引用

页码：109 / 113

页数：4

共 17 条

[1]

Vad J., Forward Blade Sweep Applied to Low-Speed Axial Fan Rotors of Controlled Vortex Design: An Overview, ASME Journal of Engineering for Gas Turbines and Power, 135, 1, pp. 1-9, (2013)

[2]

Benedek T., Vad J., Concerted Aerodynamic and Acoustic Diagnostics of an Axial Flow Industrial Fan, Involving the Phased Array Microphone Technique, ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. Düsseldorf. 2014

[3]

Toth B., Phased Array Microphone Measurement of an Axial Flow Fan, (2014)

[4]

Benedek T., Toth P., Beamforming Measurements of an Axial Flow Fan in an Industrial Environment, Periodica Polytechnica Mechanical Engineering, 57, 2, pp. 37-46, (2012)

[5]

Underbink J.R., Aeroacoustic Phased Array Testing in Low Speed Wind Tunnels, Aeroacoustic Measurements, (2002)

[6]

Sijtsma P., Oerlemens S., Holthusen H., Location of Rotating Sources by Phased Array Measurements, AIAA Paper 2167-2001, (2001)

[7]

Lowis C., Joseph P., Determining the Strength of Rotating Broadband Sources in Ducts by Inverse Methods, Journal of Sound and Vibration, 295, 3-5, pp. 614-632, (2005)

[8]

Sijstma P., Using Phased Array Beamforming to Identify Broadband Noise Sources in a Turbofan Engine, International Journal of Aeroacoustics, 9, 3, pp. 357-374, (2010)

[9]

Minck O., Binder N., Cherrier O., Lamotte L., Budinger V., Fan Noise Analysis Using a Microphone Array, Proceedings International Conference on Fan Noise. Senlis, 2012

[10]

Podboy G.G., Horvath C., Phased Array Noise Source Localization Measurements Made on a Williams International FJ44 Engine, AIAA Paper 2009-3183, (2009)

← 1 2 →