Study of the Constraint Pillar Test and the Application in Gob-Side Entry Retaining

Firmly, the bearing capacity test of 1:1 equal ratio pillar under different constraint forms and different filling medium conditions was carried out. The results show that the binding pillar-forming effect is relatively good. The constraint ability of unconstrained, metal mesh, polyester mesh, hooked iron flat-hoop bushing, bellows, and spiral iron pipe is enhanced, in turn, and the carrying capacity is improved successfully. The homogeneity of high-water materials is better than concrete, and they have better compressibility, but their carrying capacity is relatively weak. The carrying capacity of concrete pillars is generously higher than that of high-water materials, but the compressibility is poor. Second, the migration characteristics of the surrounding rock structure of the gob-side entry retaining and the rule of side support are analyzed, the requirements of the side support are pointed out, and the side-support technology of the binding pillar is proposed. Taking Hijiata Mine's 50108 working face gob-side entry retaining as an example, the bellows pump-filled concrete pillar is used as the side support body, supplemented by handling steel mesh and air-duct cloth, and toughness material is sprayed between the pillars to seal the goaf, meeting the requirements of side support and road stability. The pillar has the characteristics of high early strength, strong final consolidation carrying capacity, good crimping effect, high mechanism degree, fast construction speed, less concrete consumption, low comprehensive cost, etc., and it has a good application prospect in the gob-side entry retaining or rapid advanced working face.