Assessment of failure analysis method for the bolted structure between selective laser melting aluminum plate and CFRP composite laminate

被引：0

作者：

Cui H. ^{[1
]}

Yan Q. ^{[1
]}

Wang X. ^{[1
]}

Bi S. ^{[1
]}

Wang X. ^{[1
]}

机构：

[1] Shenyang Aircraft Design and Research Institute of AVIC, Shenyang

[2] College of Aerospace Engineering, Nanjing University of Aeronautic and Astronautics, Nanjing

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2017年 / 34卷 / 12期

关键词：

Composite; Countersunk bolt; Ductile damage; Hashin criteria; Progressive damage; UMAT;

D O I：

10.13801/j.cnki.fhclxb.20170307.005

中图分类号：

学科分类号：

摘要：

The multi-bolt countersunk single-lap joint of SLM aluminum plate and CFRP composite laminate under tensional load was analyzed via numerical simulation and experiment. Damage initiation and progression in the structure were present in 3D FEM based on the progressive damage analysis (PDA), and the bolt load distributions as well as the failure loads and modes were compared with the physical test. With the consideration of fracture stain to stress triaxiality curve approximated by the author, it is found that there is only 1.9% difference of the failure loads between FEM and test, when both Ductile damage and Hashin criteria are introduced through UMAT. Besides, the failure modes are both pulling out illustrated in FEA and experiment. Consequently, the method assessed in this study has enough accuracy to satisfy the application requirement for such an engineering problem. The progressive damage process of both SLM aluminum plate and CFRP laminate were investigated with the validated FEM and the effect on the failure mode of the joint was studied with different stiffness of SLM aluminum plates. When the thickness of SLM aluminum plate increases to 4 mm, the pulling-out failure mode of the joints transfers from SLM aluminum plate to the CFRP composite laminate. © 2017,Chinese Society for Composite Materials. All right reserved.

引用

页码：2762 / 2769

页数：7

共 25 条

[1]

Huhne C., Zerbst A.K., Kuhlmann G., Progressive damage analysis of composite bolted joints with liquid shim layers using constant and continuous degradation modes, Composite Structures, 92, 2, pp. 189-200, (2010)

[2]

Thoppul S.D., Finegan J., Gibson R.F., Mechanics of mechanically fastened joints in polymer-matrix composite structures-A review, Composites Science and Technology, 69, 3, pp. 301-329, (2009)

[3]

Garnich M.R., Akula V.M.K., Review of degradation models for progressive failure analysis of fiber reinforced polymer composites, Applied Mechanics Reviews, 62, 1, (2009)

[4]

Tan S.C., A progressive failure model for composite laminates containing openings, Journal of Composite Materials, 25, 5, pp. 556-577, (1991)

[5]

Dano M.L., Gendron G., Picard A., Stress and failure analysis of mechanically fastened joints in composite laminates, Composites Structures, 50, 3, pp. 287-296, (2000)

[6]

Camanho P.P., A progressive damage model for mechanically fastened joints in composite laminates, Journal of Composite Materials, 33, 24, pp. 2248-2280, (1999)

[7]

Kishore A.N., Malhotra S.K., Prasad N.S., Failure analysis of multi-pin joints in glass fibre/epoxy composite laminates, Composite Structures, 91, 3, pp. 266-277, (2009)

[8]

Mccarthy M.A., Lawlor V.P., Stanley W.F., An experimental study of bolt-hole clearance effects in single-lap, multibolt composite joints, Journal of Composite Materials, 39, 9, pp. 799-825, (2005)

[9]

Olmedo A., Ssantiuste C., On the predictions of bolted single-lap composites joints, Composite Structures, 94, 6, pp. 2110-2117, (2012)

[10]

Chen Q., Zhang J., Study on the joint performance of composite bolted joints based on energy damage evolution[EB]

← 1 2 3 →