Noise discrimination method for partial discharge current focused on damped oscillation waveform

被引：0

作者：

Torii H. ^{[1
]}

Hayase Y. ^{[1
]}

Yamashiro K. ^{[1
]}

Matsumoto S. ^{[2
]}

机构：

[1] FUJI ELECTRIC CO., LTD., 1-11-2, Osaki, Shinagawa-ku, Tokyo

[2] Shibaura Insutitute of Technology, 3-7-5, Toyosu, Koto-ku, Tokyo

来源：

IEEJ Transactions on Fundamentals and Materials | 2018年 / 138卷 / 02期

关键词：

Fourier transform; Insulation; Noise; Online diagnosis; Partial discharge; Wavelet transform;

D O I：

10.1541/ieejfms.138.64

中图分类号：

学科分类号：

摘要：

On-line Partial discharge (PD) measurement is very important for insulation monitoring of high-voltage equipment. One of the biggest challenges performing on-line monitoring is discrimination between PD detect signals and external noises. Experimental results using high frequency CT sensor show that the current waveforms associated with various PD signals are all damped cosine waveforms, and have unique frequency and decay times of damped oscillation. Therefore we focused attention on the damped oscillation waveform of the PD current, especially damped cosine waveform having a different number of oscillations. In addition to this, the noise discrimination method using wavelet transform or short-time Fourier transform is effective. Those noise discriminating process are applicable to on-line PD current measurement system. © 2018 The Institute of Electrical Engineers of Japan.

引用

页码：64 / 70

页数：6

共 12 条

[1]

Ma X., Zhou C., Kemp I.J., Interpretation of wavelet analysis and its application in partial discharge detection, IEEE Trans. Dielectr. & Electr. Insul., 9, 3, pp. 446-457, (2002)

[2]

Li J., Jiang T., Grzybowski S., Cheng C., Scale dependent wavelet selection for de-noising of partial discharge detection, IEEE Trans. Dielectr. & Electr. Insul., 17, 6, pp. 1705-1714, (2010)

[3]

Chan J.C., Ma H., Saha T.K., Time-frequency sparsity map on automatic partial discharge sources separation for power transformer condition assessment, IEEE Trans. Dielectr. & Electr. Insul., 22, 4, pp. 2271-2283, (2015)

[4]

On-line Partial Discharge Measurements on the Stator Winding Insulation of Rotating Electrical Machines, (2012)

[5]

Hikita M., Suzuki A., Kato T., Hayakawa N., Okubo H., Computer measurement of partial discharge characteristics and their frequency dependence, T. IEE Japan, 115 B, 10, pp. 1215-1220, (1996)

[6]

Okubo H., Hayakawa N., A novel technique for partial discharge and breakdown investigation based on current pulse waveform analysis, IEEE Trans. Dielectr. & Electr. Insul., 12, 4, pp. 736-744, (2005)

[7]

Stone G.C., Sedding H.G., Fujimoto N., Braun J.M., Practical implementation of ultrawideband partial discharge detectors, IEEE Trans. Dielectr. & Electr. Insul., 27, 1, pp. 70-81, (1992)

[8]

Alvarez F., Ortego J., Garnacho F., Sanchez-Uran M.A., A clustering technique for partial discharge and noise sources identification in power cables by means of waveform parameters, IEEE Trans. Dielectr. & Electr. Insul, 23, 1, pp. 469-481, (2016)

[9]

Tozzi M., Salsi A., Busi M., Montanari G.C., Cavallini A., Hart P.M., Permanent pd monitoring for generators: Smart alarm managemen, Innovative Smart Grid Technologies Asia, (2011)

[10]

Martinez-Tarifa J.M., Ardila-Rey J.A., Robles G., Automatic selection of frequency bands for the power ratios separation technique in partial discharge measurements: Part i, fundamentals and noise rejection in simple test objects, IEEE Trans. Dielectr. & Electr. Insul, 22, 4, pp. 2284-2292, (2015)

← 1 2 →