Design of adaptive deformation wing control system based on system identification

被引：0
|
作者：
Xie, Changchuan [1 ]
Zhu, Lipeng [1 ]
Meng, Yang [1 ]
Mao, Sen [1 ]
机构：
[1] School of Aeronautic Science and Engineering, Beihang University, Beijing
来源：
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics | 2023年 / 49卷 / 10期
关键词：
aerodynamic computation; deformation control law; dynamic property test of actuator; morphing wing design; system identification; wind tunnel test;
D O I：
10.13700/j.bh.1001-5965.2021.0717
中图分类号：
学科分类号：
摘要：
Aiming at the defect that the fixed-wing aircraft can not always be in the optimal aerodynamic configuration in the complex and changeable flight environment, the wing design concept which can adapt to the deformation according to the flight environment parameters is proposed. A wing is designed in this study to achieve deformation by deflecting the rigid wing box. The aerodynamic characteristics are investigated by the panel method coupling with the XFOIL viscous corrector. A wind tunnel test platform and data acquisition system for the actuators of the morphing wing are built. A low speed wind tunnel test is then carried out on the deformed pneumatic servo system driven by model aircraft actuators, and the mathematical model of the pneumatic servo system is obtained with the subspace identification method. The servo compensation control is carried out by proportion integral differential (PID) control combined with Smith predictive control algorithm. Finally, according to the aerodynamic data of the morphing wing and the frequency response characteristics of these actuators, a feedback control system of the adaptive morphing wing is designed to optimize the aerodynamic performance based on the compensation of actuators. This design could realize the compensation and adaptive deformation of actuators in complex environments, providing a reference for the subsequent design of the morphing wing. © 2023 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码：2761 / 2770
页数：9
相关论文
共 20 条
  • [1] CUI E J, BAI P, YANG J M., Development path of intelligent morphing aircraft, Aeronautical Manufacturing Technology, 50, 8, pp. 38-41, (2007)
  • [2] ZHANG Y X, CHEN L, WU J P, Et al., Development and key technologies of the variable camber trailing edge, Aircraft Design, 37, 6, pp. 34-39, (2017)
  • [3] MAO S, XIE C C, YANG L, Et al., Static aeroelastic characteristics of morphing trailing-edge wing using geometrically exact vortex lattice method, International Journal of Aerospace Engineering, 2019, pp. 1-15, (2019)
  • [4] LI J F, AI J Q, DONG H F., Research on the development of aircraft morphing technologies, Aeronautical Science and Technology, 20, 2, pp. 3-6, (2009)
  • [5] WOODS B K, BILGEN O, FRISWELL M I., Wind tunnel testing of the fish bone active camber morphing concept, Journal of Intelligent Material Systems and Structures, 25, 7, pp. 772-785, (2014)
  • [6] RAGHAVAN B, PATIL M J., Flight control for flexible, high-aspect-ratio flying wings, Journal of Guidance, Control, and Dynamics, 33, 1, pp. 64-74, (2010)
  • [7] BARBARINO S, BILGEN O, AJAJ R M, Et al., A review of morphing aircraft, Journal of Intelligent Material Systems and Structures, 22, 9, pp. 823-877, (2011)
  • [8] JHA A K, KUDVA J N., Morphing aircraft concepts, classifications, and challenges, Proceedings of SPIE —The International Society for Optical Engineering, 5388, pp. 213-224, (2004)
  • [9] LENG J S, SUN J, LIU Y J., Application status and future prospect of smart materials and structures in morphing aircraft, Acta Aeronautica et Astronautica Sinica, 35, 1, pp. 29-45, (2014)
  • [10] SUN Y K, ZHANG R J, WU Z G, Et al., Dynamic property test and system identification of model aircraft actuators, Journal of Beijing University of Aeronautics and Astronautics, 46, 2, pp. 294-303, (2020)
12