Structure and Mechanical Properties of WE43 Prepared by Powder Metallurgy Route

被引:0
作者
Dvorsky D. [1 ]
Kubasek J. [1 ]
Vojtech D. [1 ]
Cavojsky M. [2 ]
机构
[1] Faculty of chemical technology, Department of metals and corrosion engineering, University of chemistry and technology Prague, Technická 5, Praha 6 - Dejvice
[2] Institute of Materials and Machine Mechanics SAS, Slovak Academy of Sciences, Dúbravská cesta 9, Bratislava
来源
Dvorsky, Drahomir | 1600年 / Jan-Evangelista-Purkyne-University卷 / 16期
关键词
extrusion; milling; powder metallurgy; WE43;
D O I
10.21062/UJEP/X.2016/A/1213-2489/MT/16/5/896
中图分类号
学科分类号
摘要
Rare earth elements in magnesium alloy enhance mechanical properties, corrosion resistance, and heat stability up to 300 °C. Those enhancements with low density of magnesium determine this alloy for aviation and automotive industry. Magnesium alloys are also considered as materials for biodegradable implants. In this field there are required good mechanical properties and fair corrosion rate. In this work, WE43 alloy prepared by powder metallurgy with different conditions of sub-processes is prepared. Milling, cold uniaxial pressing, spark plasma sintering (SPS) and extrusion processes are used for sample preparations. Structure and mechanical properties of prepared materials are characterized. © 2016 Published by Manufacturing Technology. All Rights Reserved.
引用
收藏
页码:22 / 23
页数:1
相关论文
共 50 条
  • [41] Effect of Compaction Pressure on Microstructure and Properties of Copper-based Composite Prepared by Mechanical Alloying and Powder Metallurgy
    Mahani, Y.
    Zuhailawati, H.
    2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS (ICOSM 2013), 2013, 795 : 343 - +
  • [42] Microstructure, mechanical properties, and wear behavior of Al5083/GNPs nanocomposites prepared by powder metallurgy method
    Keshavarz, Saeed
    Asgharzadeh, Hamed
    Farvizi, Mohammad
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2025, 929
  • [43] Tribological behavior, mechanical properties and microstructure of Al-12Si-ZrC composite prepared by powder metallurgy
    John, C. F.
    Paul, R. C.
    Singh, S. C. E.
    Ramkumar, T.
    BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2017, 65 (02) : 149 - 154
  • [44] Effect of Space Holder on Porosity, Structure and Mechanical Properties of Al Processed via Powder Metallurgy
    R. Murugesh Kumar
    Brahma Raju Golla
    Transactions of the Indian Institute of Metals, 2021, 74 : 2379 - 2386
  • [45] Microstructure and mechanical properties of a new group of nanocrystalline medical-grade stainless steels prepared by powder metallurgy
    Javanbakht, M.
    Hadianfard, M. J.
    Salahinejad, E.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 624 : 17 - 21
  • [46] Effect of Space Holder on Porosity, Structure and Mechanical Properties of Al Processed via Powder Metallurgy
    Kumar, R. Murugesh
    Golla, Brahma Raju
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (09) : 2379 - 2386
  • [47] Microstructure and properties of AlCrFeNiCoCu high entropy alloy prepared by powder metallurgy
    Qiu, Xing-Wu
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 555 : 246 - 249
  • [48] Effect of copper on the mechanical properties of alloys formed by powder metallurgy
    Wong-Angel, Wilbert D.
    Tellez-Jurado, Lucia
    Chavez-Alcala, Jose F.
    Chavira-Martinez, Elizabeth
    Verduzco-Cedeno, Victor F.
    MATERIALS & DESIGN, 2014, 58 : 12 - 18
  • [49] Microstructural characterization and mechanical properties of microalloyed powder metallurgy steels
    Erden, Mehmet Akif
    Gunduz, Suleyman
    Turkmen, Mustafa
    Karabulut, Hasan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 616 : 201 - 206
  • [50] Investigation of mechanical properties of powder metallurgy parts with control of microstructure
    Khorsand, H.
    Habibi, S. M.
    PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 : 297 - +