Structure and Mechanical Properties of WE43 Prepared by Powder Metallurgy Route

被引：0
|
作者：
Dvorsky D. [1 ]
Kubasek J. [1 ]
Vojtech D. [1 ]
Cavojsky M. [2 ]
机构：
[1] Faculty of chemical technology, Department of metals and corrosion engineering, University of chemistry and technology Prague, Technická 5, Praha 6 - Dejvice
[2] Institute of Materials and Machine Mechanics SAS, Slovak Academy of Sciences, Dúbravská cesta 9, Bratislava
来源：
Dvorsky, Drahomir | 1600年 / Jan-Evangelista-Purkyne-University卷 / 16期
关键词：
extrusion; milling; powder metallurgy; WE43;
D O I：
10.21062/UJEP/X.2016/A/1213-2489/MT/16/5/896
中图分类号：
学科分类号：
摘要：
Rare earth elements in magnesium alloy enhance mechanical properties, corrosion resistance, and heat stability up to 300 °C. Those enhancements with low density of magnesium determine this alloy for aviation and automotive industry. Magnesium alloys are also considered as materials for biodegradable implants. In this field there are required good mechanical properties and fair corrosion rate. In this work, WE43 alloy prepared by powder metallurgy with different conditions of sub-processes is prepared. Milling, cold uniaxial pressing, spark plasma sintering (SPS) and extrusion processes are used for sample preparations. Structure and mechanical properties of prepared materials are characterized. © 2016 Published by Manufacturing Technology. All Rights Reserved.
引用
收藏
页码：22 / 23
页数：1
相关论文
共 50 条
  • [21] Cu-TiB Metal Matrix Composites Prepared by Powder Metallurgy Route
    Guo, Z.
    Li, N.
    Hu, J.
    SCIENCE OF SINTERING, 2015, 47 (02) : 165 - 174
  • [22] Microstructures and mechanical properties of ductile NbTaTiV refractory high entropy alloy prepared by powder metallurgy
    Guo, Wenmin
    Liu, Bin
    Liu, Yong
    Li, Tianchen
    Fu, Ao
    Fang, Qihong
    Nie, Yan
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 776 : 428 - 436
  • [23] Structure and properties of powder metallurgy phosphorous steels
    V. N. Antsiferov
    A. A. Shatsov
    S. A. Oglezneva
    Powder Metallurgy and Metal Ceramics, 1999, 38 : 162 - 165
  • [24] Effects of Mo content on microstructure and mechanical properties of Ti-Mo alloys prepared by powder metallurgy
    Wang C.-F.
    Cai Q.
    Liu J.-X.
    Yan X.-F.
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2023, 33 (02): : 328 - 342
  • [25] Mechanical properties of microporous aluminum fabricated by powder metallurgy
    Xie, Zhen-kai
    Yamada, Yasuo
    Banno, Takumi
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS, 2006, 45 (29-32): : L864 - L865
  • [26] The effect of sintering temperature on the mechanical properties of a Cu/CNT nanocomposite prepared via a powder metallurgy method
    Van Trinh P.
    Bui H.T.
    Tran B.T.
    Van Tu N.
    Le D.Q.
    Than X.T.
    Van Chuc N.
    Doan D.P.
    Phan N.M.
    Advances in Natural Sciences: Nanoscience and Nanotechnology, 2011, 2 (01)
  • [27] α2-Ti3Al Intermetallic Compound Prepared by Powder Metallurgy and Its Mechanical Properties
    Chen, Liqing
    Wang, Jijie
    Chen, Lin
    JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, 2008, 5 (08) : 1668 - 1671
  • [28] Investigation of thermal and mechanical properties of Cu-Al alloys with silver addition prepared by powder metallurgy
    Gohar, Ghulam Abbas
    Manzoor, Tareq
    Shah, Asad Naeem
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 735 : 802 - 812
  • [29] Structure and properties of powder metallurgy phosphorous steels
    Antsiferov, VN
    Shatsov, AA
    Oglezneva, SA
    POWDER METALLURGY AND METAL CERAMICS, 1999, 38 (3-4) : 162 - 165
  • [30] Microstructure and mechanical properties of Ti-6Al-Mo-Fe alloy prepared by powder metallurgy
    Wang, Tianguo
    Qin, Qun
    Zhou, Dongjian
    ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 1671 - +
12345