Homogenization treatment and microstructure of semicontinous casting ingot of 2D70 heat-resistance aluminum alloy

被引：0

作者：

Li, Pei-Yue ^{[1
]}

Xiong, Bai-Qing ^{[1
]}

Zhang, Yong-An ^{[1
]}

Li, Zhi-Hui ^{[1
]}

Wang, Guo-Jun ^{[1
,2
]}

Wang, Feng ^{[1
]}

Zhu, Bao-Hong ^{[1
]}

机构：

[1] State Key Laboratory of Nonferrous Metals and Processes, General Research Institute for Nonferrous Metals, Beijing 100088, China

[2] Northeast Light Alloy Co., Ltd., Harbin 150060, China

来源：

Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals | 2010年 / 20卷 / 11期

关键词：

2d70 aluminum alloys - Dendritic microstructure - Energy dispersive X ray spectroscopy - Homogenization treatment - Non-equilibrium eutectic - Overheating temperatures - Semi-continuous casting - X-ray diffraction analyses (XRD);

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The constituents of the semicontinuous casting ingot of 2D70 heat-resistance aluminum alloy and homogenization treatment were studied by optical microscopy (OM), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), differential scanning calorimetry(DSC) and X-ray diffraction analysis (XRD). The results indicate that the semicontinuous casting ingot of 2D70 aluminum alloy presents a dendritic microstructure with severe segregation. The phases of the nonequilibrium eutectic are α(Al)+ θ(Al2Cu) + S(Al2CuMg) whose overheating temperature is 505.4°C. The volume fraction of hard dissolve phases such as Al7Cu2Fe, Al7Cu4Ni and Al9FeNi changes a little below 530°C. The reasonable homogenization treatment process of the alloy is (490°C, 16 h) +(520°C, 16 h).

引用

页码：2101 / 2105

共 50 条

[41] Effect of Phosphorus Content and Heat Treatment Temperature on Microstructure and Corrosion Resistance of Ni–(X)P–GO Nanocomposite Coating on AZ31D Alloy [J].

Hanachi M. ;

Seyedraoufi Z.S. ;

Samiee M. ;

Shajari Y. .

Journal of Bio- and Tribo-Corrosion, 2021, 7 (01)

[42] Modulation Effects of K2ZrF6 Additive on Microstructure and Heat Resistance of Micro-arc Oxide Coatings Fabricated on LY12 Aluminum Alloy [J].

Zhang Xin-Meng ;

Chen Dong-Fang ;

Gong Chun-Zhi ;

Yang Shi-Qin ;

Tian Xiu-Bo .

JOURNAL OF INORGANIC MATERIALS, 2010, 25 (08) :865-870

[43] Influence of heat treatment on microstructure and adhesion of Al2O3 fiber-reinforced electroless Ni-P coating on Al-Si casting alloy [J].

Novak, M. ;

Vojtech, D. ;

Vitu, T. .

MATERIALS CHARACTERIZATION, 2010, 61 (06) :668-673

[44] Effect of T6 heat treatment on microstructure and mechanical properties of large-weight aluminum alloy flywheel housing parts formed by local-loading squeeze casting( vol 24 ,pg 1612 , 2023) [J].

Chen, Qiang ;

Zhao, Wenwen ;

Jiang, Jufu ;

Huang, Minjie ;

Li, Mingxing ;

Wang, Ying ;

Ding, Changjie ;

Zou, Dechao .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 :8417-8417

[45] Effect of Heat Treatment on Microstructure and Micro-Wear Resistance of Selective Laser Melted Mg-Al-Zn Alloy with La2O3 Addition [J].

Wang, Xingcheng ;

Chen, Changjun ;

Zhang, Min .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (03) :2316-2328

[46] Effect of Heat Treatment on Microstructure and Micro-Wear Resistance of Selective Laser Melted Mg-Al-Zn Alloy with La2O3 Addition [J].

Xingcheng Wang ;

Changjun Chen ;

Min Zhang .

Journal of Materials Engineering and Performance, 2021, 30 :2316-2328

[47] Effect of heat treatment on the microstructure and mechanical properties of spray formed 7055 aluminum alloy TIG welded joints reinforced by ZrB2/ Al3(Sc, Zr) particles [J].

Huang, Ting ;

Xu, Junhua ;

Yu, Lihua ;

Jiang, Yubo ;

Li, Cheng ;

Zhao, Lijun .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 :4920-4928

[48] Effect of T6 heat treatment in tribological properties of A356 aluminum alloy reinforced with Al2O3 nano particles by combination effect of stir and squeeze casting method [J].

Sekar, K. ;

Allesu, K. ;

Joseph, M. A. .

DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 :968-971

[49] INFLUENCE OF HEAT TREATMENT ON CORROSION RESISTANCE OF PM COMPOSITE MATERIALS BASED ON EN AW-2124 ALUMINUM ALLOY REINFORCED WITH THE Al2O3 CERAMIC PARTICLES [J].

Dobrzanski, Leszek A. ;

Wlodarczyk, Anna ;

Adamiak, Marcin ;

Nawrat, Ginter .

COMPOSITES THEORY AND PRACTICE, 2005, 5 (01) :24-34

[50] Effects of V Element and Heat Treatment Process on Microstructure and Mechanical Properties of Additive Manufacturing of Titanium Aluminum Alloy Using Flux-Core Arc Welding Wire with TiH2 Powder [J].

Lv, Yuzhao ;

Wang, Ting ;

Wei, Lianfeng ;

Zhang, Liang ;

Yuan, Bo ;

Chen, Zhichao .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025, 34 (05) :3929-3936

← 1 2 3 4 5 →