Effects of different injectors on spray characteristics of power-law non-Newtonian propellant

被引：0
作者：
Li, Long-Fei [1 ]
Zhang, Meng-Zheng [1 ]
Yang, Wei-Dong [1 ]
Wang, Yan-Tao [1 ]
机构：
[1] Xi'an Aerospace Propulsion Institute, China Aerospace Science and Technology Corporation, Xi'an
来源：
Hangkong Dongli Xuebao/Journal of Aerospace Power | 2014年 / 29卷 / 12期
关键词：
Atomizer; Non-Newtonian fluid; Power-law; Propellant; Spray characteristics;
D O I：
10.13224/j.cnki.jasp.2014.12.028
中图分类号：
学科分类号：
摘要：
In order to seek the effective injector type of the power-law non-Newtonian propellant, a water-based simulants whose rheological behavior was in accord with actual propellant was used. The injectors, including plain orifice, impinging injector, shearing impinging pneumatic atomizer, effervescent atomizer and swirling injector were investigated by experiments, and the effects of different injectors and their structural parameters on the spray characteristics were compared. The results indicate that the impinging injector is effective and its impinging angle and injection velocity are the main influencing parameters to spray property. The effervescent atomizer is an effective injector type. Water-based simulants break up and produce drops when ratio of air/liquid mass flow rate is about 4%. ©, 2014, BUAA Press. All right reserved.
引用
收藏
页码：2987 / 2992
页数：5
相关论文
共 18 条
  • [1] Zhang M., Chen W., Yang W., Et al., Atomization and characteristics of gelled propellant with impinging injector, Journal of Propulsion Technology, 30, 1, pp. 46-51, (2009)
  • [2] Benveniste N., Shai R., The status of gel propellants in year 2000, Proceedings of 5th International Symposium on special Topics in Chemical Propulsion, pp. 172-194, (2000)
  • [3] Madlener K., Ciezki H.K., Some aspects of rheological and flow characteristic of gel fuels with regard to propulsion application, (2009)
  • [4] James M.G., Douglas C.R., James R., Flow visualization of a rocket injector spray using gelled propellant simulants, (1991)
  • [5] Wei C., Yang W., Mao G., Rheological behavior of a polymer-gellant gel propellants simulants, Advanced in Aeronautical Science and Engineering, 2, 1, pp. 110-114, (2011)
  • [6] Mauro B., Investigation of the spray characteristics of the gelled fuel Jet A-1 using an impinging jet spray, (2003)
  • [7] Chojnacki K.T., Feikema D.A., Spray studies of gelled liquids, (1994)
  • [8] Chojnacki K.T., Feikema D.A., Spray studies of gelled bipropellant simulants using planar laser induced fluorescence, (1995)
  • [9] Von Kampen J., Madlener K., Ciezki H.K., Characteristic flow and spray properties of gelled fuels with regard to the impinging jet injector type, (2006)
  • [10] Ciezki H.K., Robers A., Schneider G., Investigation of the spray behavior of gelled Jet A-1 fuels using an air blast and impinging jet atomizer, (2002)
12