Buckling and reliability analysis of single layer grid dome with diagonal brace under snow load

被引：7

作者：

Kato S. ^{[1
]}

Iwamoto T. ^{[2
]}

机构：

[1] Toyohashi University of Technology, Toyohashi

[2] Tomoe Corporation, 16-13 Tsukishima 4 Cho-me, Tokyo

来源：

Journal of the International Association for Shell and Spatial Structures | 2017年 / 58卷 / 03期

关键词：

Buckling; Diagonal braces; Global load factor; Grid dome; Non-uniform snow load; Reliability analysis; Reliability index; Single layer; Two-way; Ultimate strength;

D O I：

10.20898/j.iass.2017.193.862

中图分类号：

学科分类号：

摘要：

The present paper aims at investigating the buckling strength and its reliability of a two-way single layer grid dome stiffened by diagonal braces under uniform and non-uniform snow loads. The dome is supported by a substructure which is composed of a set of four enclosed eaves as a tension ring and a two-story frame underneath. The eaves, looking circular if projected on a plan, are arranged around the dome in order not to raise too much tensile stresses into the diagonal braces in the dome. First, characteristics of linear buckling, elastic buckling and elasto-plastic buckling are investigated with emphasis on the effectiveness of diagonal braces to increase the buckling strength. Secondly, with relation to reliability analysis, the elastoplastic buckling load, defining the ultimate strength, is investigated considering the stochastic properties of steel members. The mean value and coefficient of variation of the ultimate strength are evaluated based on the stochastic properties and geometric imperfections. Thirdly, a formulation is presented to analyze the reliability of ultimate strength, then followed by its numerical analysis. Finally, based on the results the relationship between the reliability index and a global load factor is discussed in detail, revealing thereby the ratio of safety. Copyright © 2017 by Shiro Kato and Takayuki Iwamoto.

引用

页码：207 / 225

页数：18

共 22 条

[1]

Fujimoto M., Imai K., Kushima S., Kinoshita R., Morita T., Buckling experiments of single layer two-way grid dome prestressed by pc bar under gravity load, Proc. of IASS 40th Anniversary Congress, pp. 105-116, (1999)

[2]

Fujimoto M., Imai K., Kinoshita S., Morita T., Buckling design method of single layer twoway grid shell with diagonal tension rod members, Proc. of IASS 2001, (2001)

[3]

Kanayama T., Hangai Y., Buckling analysis of hybrid single-layer lattice shell using supplementary parts, Proc. of IASS 2000, pp. 519-528, (2000)

[4]

Umezawa R., Hiraoka S., Takahasi K., Sunahara H., Kurosawa T., On design of kumagaya dome of a super large single layer reticulate dome with membrane roof recently constructed in Japan, Proc. of IASS-APCS 2003, pp. 134-135, (2003)

[5]

Hitomi Y., Osawa K., Nakagawa S., Saitoh M., Structural design of the yamaguchi dome, Proc. of IASS 2001, Extended Abstract, pp. 346-347, (2001)

[6]

Kato S., Yamashita T., Evaluation of elastoplastic buckling strength of two-way grid shells using continuum analogy, Int Journal of Space Structures, 17, 4, pp. 249-261, (2002)

[7]

Kato S., Yamashita T., Nakazawaa S., Kim Y., Fujibayashi A., Two-way elliptic paraboloidal single layer lattice domes, Journal of Constructional Steel Research, 63, pp. 1219-1227, (2007)

[8]

Yamashita T., Kato S., Elastic buckling characteristics of two-way grid shells of single layer and its application in design to evaluate the non-linear behavior and ultimate strength, Journal of Constructional Steel Research, 57, pp. 1287-1308, (2001)

[9]

Konno T., Kato S., Yamashita T., Buckling strength evaluation of two-way single layer lattice domes stiffened by diagonal braces, Proc. of the 9th Asian Pacific Conference on Shell and Spatial Structures, pp. 50-51, (2009)

[10]

Kato S., Nakazawa S., Yoshida N., Analysisbased evaluation of buckling strength of twoway single layer lattice dome stiffened by diagonal braces, Proc. of IASS-APCS 2012, Extended Abstract, (2012)

← 1 2 3 →