Microstructure and Wear Resistance of Fe-Ti-V-C Hardfacing Alloys by Laser Cladding

被引：1

作者：

Zong L. ^{[1
]}

Li R. ^{[1
]}

Zhang X. ^{[1
]}

机构：

[1] School of Mechanical Engineering, Shenyang University of Chemical Technology, Shenyang

来源：

| 1600年 / Chinese Mechanical Engineering Society卷 / 53期

关键词：

Fe-Ti-V-C alloys; Laser cladding; Microstructure; Wear resistance;

D O I：

10.3901/JME.2017.02.067

中图分类号：

学科分类号：

摘要：

A series of Fe-Ti-V-C hardfacing alloys with five different Ti contents were deposited on the surface of 20G steel by laser cladding. Microstructure, hardness and wear resistance were investigated using optical microscope (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), microhardness tester and abrasive wear testing machine. The results shows that the matrix is composed of ferrite and martensite, the matrix microstructure changes from acicular martensite to lath martensite, the morphology of primary (Ti,V)C changes from dendritic and flower-like shapes to globular shape and the volume fraction of primary (Ti,V)C complex carbides increase as the Ti content increase, the maximum volume fraction of primary (Ti,V)C complex carbides are attained when the Ti content is 14.7%. The microhardness of the cladding layer cross section appears reasonable gradient distribution, the microhardness of the surface layer reaches 700-950 HV0.2. The results of wet sand rubber wear tests indicate that addition of proper Ti element into hardfacing alloys effectively enhances the wear resistance of alloys. When 14.7% Ti content is added, the cladding layer has an excellent wear resistance, which is attributed to the more globular (Ti,V)C complex carbides distributed uniformly and dispersely in the ferrite and lath martensite matrix. © 2017 Journal of Mechanical Engineering.

引用

页码：67 / 73

页数：6

共 15 条

[1]

Dubourg L., Archambeault J., Technological and scientific landscape of laser cladding process in 2007, Surface and Coatings Technology, 202, 24, pp. 5863-5869, (2008)

[2]

Song B., Liu S., Liu F., Et al., Effect of in situ TiC on microstructure and properties of the laser-arc hybrid welding joints of high strength steels, Journal of Mechanical Engineering, 51, 12, pp. 76-82, (2015)

[3]

Tobar M.J., Alvarez C., Amado J.M., Et al., Morphology and characterization of laser clad composite NiCrBSi-WC coatings on stainless steel, Surface and Coatings Technology, 200, pp. 6313-6317, (2006)

[4]

Singh A., Dahotre N.B., Laser in-situ synthesis of mixed carbide coating on steel, Journal of Materials Science, 39, pp. 4553-4560, (2004)

[5]

Zhang G., Yang H., Wang Q., Et al., Microstructure and properties of laser cladding layer on ferritic stainless steel, Journal of Mechanical Engineering, 52, 12, pp. 37-45, (2016)

[6]

Zhang G., Li L., Liu N., Et al., Structure and properties of nickel-based on crust breaker deposited by plasma arc welding, Journal of Mechanical Engineering, 50, 20, pp. 70-76, (2014)

[7]

Hajihashemi M., Shamanian M., Azimi G., Physical, mechanical, and dry sliding wear properties of Fe-Cr-W-C hardfacing alloys under different tungsten addition, Metallurgical and Materials Transactions B, 46, 2, pp. 919-927, (2015)

[8]

Zhou S.P., Shen Y.H., Zhang H., Et al., Heat treatment effect on microstructure, hardness and wear resistance of Cr26 white cast iron, Chinese Journal of Mechanical Engineering, 28, 1, pp. 140-147, (2015)

[9]

Jilleh A., Babu N.K., Thota V., Et al., Microstructural and mechanical properties investigation of TiC reinforced hardface alloy deposited on mild steel substrate, Trans. Indian Inst. Met., 66, 4, pp. 433-436, (2013)

[10]

Hsieh C.C., Liu Y.C., Wang J.S., Et al., Microstructural evolution with various Ti contents in Fe-based hardfacing alloys using a GTAW technique, Met. Mater. Int., 20, 4, pp. 701-712, (2014)

← 1 2 →