Review of digital twin methods for additive manufacturing

被引：0
|
作者：
Meng D. [1 ]
Yang W. [1 ,2 ]
Cai Z. [1 ]
Guo Z. [3 ]
机构：
[1] School of Mechanical Engineering, Hcbci University of Technology, Tianjin
[2] National Engineering Research Center for Technological Innovation Methods and Tool, Hcbci University of Technology, Tianjin
[3] Beijing National Innovation Institute of Lightweight Ltd., Beijing
来源：
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS | 2024年 / 30卷 / 04期
基金：
中国国家自然科学基金;
关键词：
additive manufacture; artificial intelligence; binder jetting; digital twins; Industry; 4.0;
D O I：
10.13196/j.cims.2023.0466
中图分类号：
学科分类号：
摘要：
Additive manufacturing (AM) can provide reliable data support for digital twin model with its all-digital processing mode. Digital twins help AM give full play to its advantages different from traditional manufacturing in the process of design, manufacturing, service and so on. The combination of the two has been widely concerned in the field of industrial manufacturing. To summarize the implementation method of digital twin in AM, the concept and development of digital twin were introduced, and the key technologies of digital twin in AM were analyzed. Based on the application potential of digital twins for the whole life cycle process of AM, the relevant research methods were expounded from four stages: design, manufacturing, quality inspection and service. In addition, the challenge of implementing digital twins in binder spraying process was prospected, and a digital twin technology route for it was proposed. Finally, the problems and future development directions of digital twins in AM were summarized. © 2024 CIMS. All rights reserved.
引用
收藏
页码：1171 / 1188
页数：17
相关论文
共 67 条
  • [1] ZHENG P, SIVABALAN A S., A generic tri-model-based approach for product-level digital twin development in a smart manufacturing environment, Robotics and Computer-Integrated Manufacturing, 64, (2020)
  • [2] MUKHERJEE T, DEBROY T., A digital twin for rapid qualification of 3D printed metallic components, Applied Materials Today, 14, pp. 59-65, (2019)
  • [3] GRIEVES M., Digital twin: Manufacturing excellence through virtual factory replication
  • [4] GLAESSGEN E H, STARGEL D S., The digital twin paradigm for future NASA and US Air Force vehicles, Proceedings of the 53rd Structures, Structural Dynamics and Materials Conference: Special Session on the Digital Twin, pp. 1818-1829, (2012)
  • [5] WANG Jinfeng, WEN Congchuan, HUA Guangru, A survey of digital twins for concept, technology and application [J ], Chinese Journal of Construction Machinery, 21, 2, pp. 112-116, (2023)
  • [6] ZHUANG Cunbo, LIU Jianhua, XIONG Hui, Et al., Connotation, architecture and trends of product digital twin, Computer Integrated Manufacturing Systems, 23, 4, pp. 753-768, (2017)
  • [7] TAG1 Fei, LIU Weiran, LIU Jianhua, Et al., Digital twin and its potential application exploration, Computer Integrated Manufacturing Systems, 24, 1, pp. l-18, (2018)
  • [8] LI Hao, WANG Haoqi, CHENG Ying, Et al., Technology and application of data-driven intelligent services for complex prod-ucts, China Mechanical Engineering, 31, 7, pp. 757-772, (2020)
  • [9] REISCH R T, HAUSER T, LUTZ B, Et al., Context awareness in process monitoring of additive manufacturing using a digital twin, International Journal of Advanced Manufacturing Technology, 119, 5-6, pp. 3483-3500, (2022)
  • [10] GRIEVES M, VICKERS J., Digital twin: Mitigating unpredictable, undesirable emergent behavior in complex systems, (2017)
1234567