Reducing stress concentration in welded joints by brazing

被引：1

作者：

Tsumarev, Yu.A. ^{[1
]}

Tsumarev, E.N. ^{[1
]}

Ignatova, E.V. ^{[1
]}

Latypova, E.Yu. ^{[1
]}

机构：

[1] The Belarusian-Russian University, Mogilev

来源：

Welding International | 2015年 / 29卷 / 03期

关键词：

coated electrode; corrosion resistance; elastic modulus; soldering; stress concentration; surfacing; welded joint;

D O I：

10.1080/09507116.2014.911425

中图分类号：

学科分类号：

摘要：

A method for reducing the stress concentration in welded joints is proposed. The method is based on depositing a brazed bead in the weld zone produced from material with a melting point and elasticity modulus lower than those of the parent material. It is shown that zinc is the most efficient material for producing these beads and reduces not only the level of maximum stresses in the joints by 27% in comparison with the currently available method based on the deposition of an additional bead with a coated electrode, but also increases the corrosion resistance of the joint and also reduces the thermal effect on the joint with an appropriate reduction of energy consumption. © 2014 Taylor & Francis.

引用

页码：227 / 229

页数：2

共 50 条

[31] Evaluating the stress concentration due to elongated defects in welded area [J].

Abd El-Ghany, KM ;

El-Mahallawi, I ;

El-Koussy, MR .

CURRENT ADVANCES IN MECHANICAL DESIGN AND PRODUCTION VII, 2000, :261-270

[32] Analysis of the stress intensity factor of welded joints under prior corrosion and complex stress fields [J].

Zhiyu Jie ;

Yadong Li ;

Xing Wei .

Journal of Modern Transportation, 2016, 24 (04) :270-276

[33] Analysis of the stress intensity factor of welded joints under prior corrosion and complex stress fields [J].

Jie Z. ;

Li Y. ;

Wei X. .

Journal of Modern Transportation, 2016, 24 (4) :270-276

[34] Fatigue Strength Improvement by Replacing Welded Joints with Ductile Cast Iron Joints [J].

Hidaka, Tetsuro ;

Noda, Nao-Aki ;

Sano, Yoshikazu ;

Kai, Nobuhiro ;

Fujimoto, Hiroyoshi .

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2019, 105 (06) :619-628

[35] Fatigue Strength Improvement by Replacing Welded Joints with Ductile Cast Iron Joints [J].

Hidaka, Tetsuro ;

Noda, Nao-Aki ;

Sano, Yoshikazu ;

Kai, Nobuhiro ;

Fujimoto, Hiroyoshi .

ISIJ INTERNATIONAL, 2019, 59 (10) :1860-1869

[36] A simplified analysis of residual stress at welded joints between plate and penetrating pipe [J].

Mochizuki, M ;

Hayashi, M ;

Nakagawa, M ;

Tada, N ;

Shimizu, S .

JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 1997, 40 (01) :8-14

[37] A method of determining geometric stress for fatigue strength evaluation of steel welded joints [J].

Xiao, ZG ;

Yamada, K .

INTERNATIONAL JOURNAL OF FATIGUE, 2004, 26 (12) :1277-1293

[38] Fatigue strength assessment of tubular welded joints by an alternative structural stress approach [J].

Thevenet, David ;

Ghanameh, Mohamad Fathi ;

Zeghloul, Abderrahim .

INTERNATIONAL JOURNAL OF FATIGUE, 2013, 51 :74-82

[39] Study of Typical Welded Joint Hot Spot Stress Concentration Factor [J].

Wang Binjie ;

Li Qiang ;

Liu Zhiming .

MATERIALS SCIENCE AND ENGINEERING APPLICATIONS, PTS 1-3, 2011, 160-162 :1482-1487

[40] Stress concentration factors and fatigue behaviour of welded thin-walled CHS-SHS T-joints under in-plane bending [J].

Mashiri, FR ;

Zhao, XL ;

Grundy, P .

ENGINEERING STRUCTURES, 2004, 26 (13) :1861-1875

← 1 2 3 4 5 →