Synchronously enhanced flame retardancy and mechanical properties of polylactic acid via in-situ assembly of polyphosphazene nanoparticles on ammonium polyphosphate

Polylactic acid (PLA) exhibits wide potential applications in many fields ranging from textile, packaging material to biomedical devices. However, the relatively low mechanical properties and inflammability are obstacles to the expansion of its application. Here, a kind of polyphosphazene nanoparticles with tannic acid (TA) as template, hexachlorocyclotriphosphazene (HCCP) and 4,4 '-Sulfonyldiphenol (BPS) as comonomers were prepared (named as HTB), and then combined with ammonium polyphosphate (APP) to enhance the comprehensive properties of PLA composites. The introduction of HTB strengthened the interfacial adhesion of composites via constructing the hydrogen bond interaction between PLA and APP, promoting the homogenous dispersion of APP in the composite and the formation of APP network. The flame retardant measurements presented that incorporating 10 wt% APP and 5 wt% HTB in PLA increased the limit oxygen index (LOI) value to 31.0% and endowed the composite with the V-0 rating of UL-94 test and simultaneously, the peak of heat release rate (PHRR) and total heat release (THR) of the composite decreased by 14.2% and 13.2% compared with pure PLA. Specially, there was almost no melt drip appeared during the combustion process, which was distinctly different from the combustion behavior of the composite containing only 20 wt% APP with the V-2 rating of UL-94 test. The uniform dispersion of APP in the PLA matrix and the strong interfacial adhesion between APP and the PLA matrix contribute to the enhancement of the mechanical properties of composites, and the elongation at break, Young's modulus and impact strength of the composite were increased by 52.9%, 7.6% and 24.2%, respectively. The present study offers novel insights for the trade-off between flame retardancy and mechanical properties with PLA composites.