Enhancement of pitting corrosion resistance of austenitic stainless steel through deposition of amorphous/nanocrystalline oxy-nitrided phases by active screen plasma treatment

被引：0
作者：
Li Y. [1 ,2 ]
He Y. [2 ]
Qiu J. [1 ]
Zhao J. [2 ]
Ye Q. [1 ]
Zhu Y. [1 ]
Mao J. [2 ]
机构：
[1] Department of Materials Science and Engineering, Yantai University, Yantai
[2] State Key Laboratory of Tribology, Tsinghua University, Beijing
来源：
Li, Yang (metalytu@163.com) | 2018年 / Universidade Federal de Sao Carlos卷 / 21期
基金：
中国国家自然科学基金;
关键词：
Austenitic stainless steel; Oxy-nitrided; Pitting corrosion; XPS;
D O I：
10.1590/1980-5373-mr-2017-0697
中图分类号：
学科分类号：
摘要：
In this research, AISI 304 austenitic stainless steels were efficient treatment using active screen plasma oxy-nitriding technique. The modified layers were characterized by X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopes, and atomic force microscopy. In addition, the pitting corrosion resistances of untreated and oxy-nitrided samples were analyzed by polarization method in 3.5 wt.% NaCl solution. The results showed that a duplex-layer consisting of a deposition layer and a diffusion layer (including CrN+α phase and nitrogen expanded austenite phase) was generated. Special concern has been given to the formation of an amorphous top layer for the deposition of nano sized oxy-nitrides. It believed that the deposition layer of oxy-nitrides formed on steel surface during active screen plasma oxy-nitriding that lead to improved corrosion resistance of AISI 304 austenitic stainless steel, so that the pitting corrosive attack can be avoided. © 2018 Universidade Federal de Sao Carlos. All rights reserved.
引用
收藏
相关论文
共 52 条
  • [1] Lo KH, Shek CH, Lai JKL., Recent developments in stainless steels, Materials Science and Engineering: R: Reports, 65, 4-6, pp. 39-104, (2009)
  • [2] Sun Y, Haruman E., Tribocorrosion behaviour of low temperature plasma carburised 316L stainless steel in 0.5 M NaCl solution, Corrosion Science, 53, 12, pp. 4131-4140, (2011)
  • [3] Zheng SJ, Wang YJ, Zhang B, Zhu YL, Liu C, Hu P, Et al., Identification of MnCr2O4 nano-octahedron in catalysing pitting corrosion of austenitic stainless steels, Acta Materialia, 58, 15, pp. 5070-5085, (2010)
  • [4] Karimzadeh N, Moghaddam EG, Mirjani M, Raeissi K., The effect of gas mixture of post-oxidation on structure and corrosion behavior of plasma nitrided AISI 316 stainless steel, Applied Surface Science, 283, pp. 584-589, (2013)
  • [5] Li Y, Wang Z, Wang L., Surface properties of nitrided layer on AISI 316L austenitic stainless steel produced by high temperature plasma nitriding in short time, Applied Surface Science, 298, pp. 243-250, (2014)
  • [6] Escalada L, Lutz J, Bruhl SP, Fazio M, Marquez A, Mandl S, Et al., Microstructure and corrosion behavior of AISI 316L duplex treated by means of ion nitriding and plasma based ion implantation and deposition, Surface and Coatings Technology, 223, pp. 41-46, (2013)
  • [7] Fossati A, Borgioli F, Galvanetto E, Bacci T., Corrosion resistance properties of glow-discharge nitrided AISI 316L austenitic stainless steel in NaCl solutions, Corrosion Science, 48, 6, pp. 1513-1527, (2006)
  • [8] Dong H., S phase surface engineering of Fe-Cr, Co-Cr and N-Cr alloys, International Materials Reviews, 55, 2, pp. 65-98, (2010)
  • [9] Campos M, de Souza SD, Martinez LG, Olzon-Dionysio M., Study of expanded austenite formed in plasma nitrided AISI 316L samples, using synchrotron radiation diffraction, Materials Research, 17, 5, pp. 1302-1308, (2014)
  • [10] Hashemi B, Rezaee Yazdi M, Azar V., The wear and corrosion resistance of shot peened-nitrided 316L austenitic stainless steel, Materials & Design, 32, 6, pp. 3287-3292, (2011)
123456